|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2004 GasGas 300 ec frame guards
Does anybody know of a good set of frame guards for a 2004 GG 300 ec ....
Ive got some long plastic / carbon look ones of Fleabay for ?30.00 but they dont fit the bends are in the wrong place .... Anybody ? |
#2
|
||||
|
||||
They haven't changed the fitment until 11. I put 11 frame guards on my 04.
__________________
2013 GasGas 300 2004 GasGas 200 2011 GasGas 300 Ortonville Minnesota |
#3
|
||||
|
||||
On my 2001 I used:
Go FaSTERS part number be250520030ct Frame Protection2FW-501 (was $29.47 back in 2011) I had to trim it just a little with a utility knife. Around the master cylinder, I think.
__________________
Thanks to FLY Racing. |
#4
|
||||
|
||||
I'm using the 2011 guards on my 00'. I had to drill out my swing arm pivot bolt some to fit the male locating plastic pins in place that are molded into the guards. The newer bikes use a larger/different pivot bolt than the old bikes.
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#5
|
||||
|
||||
+ a slight difference when they changed to the 'B' frame but that is an easy Exacto knife project
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#6
|
||||
|
||||
It's a very easy trim job with a knife because it's just a plastic tab and not a full molded plastic ridge. This is where the guard is fitted into the valley of the B frame.
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#7
|
|||
|
|||
I've been looking for frame protectors too, but on gofasters it doesn't allow me to add them to the cart.
__________________
Jack - western PA 2006 KTM 250 sx 2006 EC 200/ 11' style kit--GONE 2004 200 EXC 1997 KDX 220 2004 CRF 250X 1974 CL125 www.youtube.com/allthatstuff35 <---some gasgas videos here |
#8
|
||||
|
||||
Order by phone. I always preferred talking to the guys, especially when it was Mark on the other end of the line.
__________________
2004 GasGas DE250 |
#9
|
|||
|
|||
Pretty sure I have a pair of those at home. I'm out on the road this week but when I get back, would be glad to send photos of them if you think it might help. They're still in the bag, with the part #.
|
#10
|
||||
|
||||
Some company made aluminum guards for the older bikes, my son has a set on his 01 250 gasser.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Frame guards | hamilton | Enduro Chassis & Body | 2 | 05-12-2013 10:19 AM |
frame guards | john r b | Enduro Chassis & Body | 10 | 11-25-2012 12:41 PM |
plastic frame guards | dmstarr | General Discussions & Announcements | 2 | 11-18-2007 06:46 PM |