|
Other GasGas Bikes/Quads Trials, Pampera, Wild HP, etc. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Well it works now,
But now i have a new problem. I got spark. So cdi works. Spark gets wet, so carb works But... It does nothing when kicking 6 months ago before renewing the quad the engine worked. I did no change to the engine. I cleaned the carb but doesnt help. Spark is a new one and works when i hold it on the engine and kickstart. Compression is good. Have to kick hard. Maybe to hard sometimes haha. |
#12
|
|||
|
|||
Ps i still have the yellow, black/white plug connect.
Otherwise i dont have spark |
#13
|
|||
|
|||
Look closely at the wiring diagram. Wire 68 black/white connects to yellow/green which is ground. When you connect it to yellow, it winds up getting grounded through the lighting coil. This is definitely wrong. Who knows what effect that will have.
Make your own diagram for the CDI wires by translating the numbers and colours into English. You have to know what function the wires have to be sure the CDI connections are correct.
__________________
2011 EC250E |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2002 ec300 light wiring and speedo wiring help needed. | andy176 | Enduro Electrical & Wiring | 0 | 02-04-2014 07:38 AM |
2012 TXT Pro All Electric | Moto7man | Other GasGas Bikes/Quads | 44 | 01-15-2013 10:03 PM |
Wild wiring | case-racing | Other GasGas Bikes/Quads | 3 | 01-25-2012 07:18 PM |
Gas Gas electric conversion | gasgasman | Other GasGas Bikes/Quads | 10 | 11-14-2011 02:50 PM |
electric shocks! | reeve | Enduro Electrical & Wiring | 1 | 09-15-2008 05:34 PM |