Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-19-2010, 11:22 AM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default Kickstarter Hardware

Kickstarter fell off yesterday . Both bolts were gone...that is what I get for not making sure everything is snugged. I got lucky that I had some extra bolts that worked back at the car. However it looks like I lost the following part "18-KICKSTART PEDAL BASE BALL". Any ideas on how I could find one locally? Would a fastener shop have something like this? There must be some size or #?
The bolts and washers should be easy enough to get.

http://www.gofasters.com/index.php?m...e10ea2b394fa58


__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote


  #2  
Old 03-19-2010, 11:47 AM
stainlesscycle's Avatar
stainlesscycle stainlesscycle is offline
Site Sponsor
 
Join Date: Jun 2009
Location: morgantown, wv
Posts: 1,608
Default

it's a ball bearing - probably 1/4" - could be 3/16 or 5/16 i never checked - you might even have one rolling around on the floor somewhere...

Last edited by stainlesscycle; 03-19-2010 at 12:40 PM.
Reply With Quote
  #3  
Old 03-19-2010, 12:34 PM
Fred1956's Avatar
Fred1956 Fred1956 is offline
Senior Member
 
Join Date: Oct 2009
Location: NW Arkansas
Posts: 1,254
Default

and there is a spring involved. I did the same thing on mine once in the past :-( But I learned :-)
__________________
Fred Overstreet
2010 EC250 SixDays
2004 GasGas EC300 -Sold to a good home
2006 GasGas EC250-Sold to a good home
2006 GasGas TXT 280 Pro
Reply With Quote
  #4  
Old 03-19-2010, 12:39 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

Good point I bet I can find a ball bearing somewhere in the garage that will work. Ya luckily I didn't loose the spring.
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #5  
Old 03-19-2010, 01:09 PM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

it's about the size of a .177 bb, maybe a touch larger.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #6  
Old 03-19-2010, 01:32 PM
gasmonkey's Avatar
gasmonkey gasmonkey is offline
Bronze Level Site Supporter
 
Join Date: Dec 2008
Location: Waikato,NZ
Posts: 285
Default

Red locktite should be your friend.
Incedently I replaced my old slapper k/s with a yamaha one.What a majic piece of kit,far superiour than the gg article.
Reply With Quote
  #7  
Old 03-19-2010, 07:24 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

7/32 seems to work well. Loctite is on as well. Now I just have to finish prepping the bike for Sunday.
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #8  
Old 03-20-2010, 09:15 PM
twowheels's Avatar
twowheels twowheels is offline
Senior Member
 
Join Date: Oct 2009
Location: Dearborn MI
Posts: 1,860
Default

What year Yamaha? I think they changed the spline size (reduced) in 2002.

Quote:
Originally Posted by gasmonkey View Post
Red locktite should be your friend.
Incedently I replaced my old slapper k/s with a yamaha one.What a majic piece of kit,far superiour than the gg article.
__________________
Steven Beane #275
PlusOnePerformance - Superior Service the World Over - Dearborn MI
AMA District 14 (Michigan) Officer

afterhourscycle.com
Michigan's Beta and TM Race Headquarters
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
kickstarter mikevancapel Enduro Engine - 2 stroke 10 12-31-2009 07:04 AM
Kickstarter Triple W Enduro Engine - 2 stroke 1 07-31-2008 05:01 PM
kickstarter crazjarhead Enduro Engine - 2 stroke 6 08-13-2006 07:51 PM




All times are GMT -5. The time now is 02:01 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org