|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
gas cap rubber seal
I have a 2010 gas gas 250 ec and the rubber seal in the gas cap seems a little deformed. Where can i get a new one? Thanks guys! i tried gofasters, but i just got voicemail.
|
#2
|
||||
|
||||
Quote:
You'd probably be better off just getting a new cap; it's part number BE250520010CT (from the microfiche on gofasters.com). If you run into any issues, post up as I have spare cap in my kit (ordered the S3 cap hoping it would resolve leakage issues through the threads...didn't do squat). My guess is it's the same cap between '10 and '11, but don't know that for sure. |
#3
|
|||
|
|||
Cheapest option is to buy a sheet of 1mm viton rubber and a circle cutter (eBay) and make your own rubber sal
__________________
2003 txt250 Pro 2013 Ossa 280i |
#4
|
|||
|
|||
I think the rubber gas cap gasket from a KX 80 or KX 125 will also work. I have had one for 3 years without it leaking.
|
#5
|
|||
|
|||
Gas Cap Seal
I have good results with this seal. It is for a Kawasaki KX65.
The part number is: 11009-1452. I cut the center out, and trim the outer edge slightly. This is much better quality rubber, that will hold up to the ethanol in today's gasoline. My OEM seal turned into a "rawhide chew toy" and fell into the tank, at about 3 months. Steve |
#6
|
|||
|
|||
THANKS GUYS- I talked to gofasters...they said you cant order a new seal because it was defective and would dry out over time and deform. they sell a new cap with the breather in the vent line.
|
#7
|
||||
|
||||
I did the "modify a jap bike seal" for mine. I grabbed one close to size at the local Honda dealer and cut it to fit. I'll have to look for the part #.
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Exhaust rubber | bonkeye | Enduro Engine - 2 stroke | 11 | 11-05-2013 06:01 PM |
Rubber straps | Rabbitist | Enduro Chassis & Body | 4 | 06-01-2011 05:10 AM |
Intake rubber | spanner | Enduro Intake/Carburetion - 2 stroke | 4 | 12-23-2010 12:07 PM |
300 ec Intake rubber | Luke12379 | Enduro Intake/Carburetion - 2 stroke | 0 | 03-27-2010 09:34 PM |