|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2012 300/250 - light harness removal
A note for everyone who will be removing the lighting stuff. When you put it back together, insure that every wire coming from the CDI has a home. When we put it back together there was a lone male spade on a black/white wire that had been connected in the lighting harness. We left it unplugged and there is no spark in the bike. Simply create a mini harness (female spade, wire and a circular ground piece) run it to the coil ground location and your bike will run as intended. This did catch me by surprise as I kicked, kicked, kicked, kicked.......
__________________
Brad Hendry Denver, CO RMEC #21A RMXA #616 http://www.coloradoeuro.com/ http://www.foothillsbmw.com/Default.asp MOTOADVENTURE / GasGas / NORTHERN COLORADO EURO / FOOTHILLS BMW-TRIUMPH / STM SUSPENSION / FLY / DP BRAKES / ENDURO ENGINEERING / REKLUSE / FMF |
#2
|
|||
|
|||
Thanks a million
__________________
2012 ec race 300 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Key Removal | arminhammer | Enduro Electrical & Wiring | 11 | 11-07-2011 07:14 PM |