#21
|
||||
|
||||
Quote:
__________________
All healed up, and ready to burn some fat. |
#22
|
||||
|
||||
Thanks for the comment. Hope it helps you out, even a little.
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
#23
|
||||
|
||||
Hey guys just put everything back together and to my disappointment the bloody magic button isn't so magic. I tore it all down and traced all my connections and all is good(I think) I have a good ground by the coil and if I bypass my relay the starter motor turns. Almost like I'm not wired or have control from the switch to the relay but not sure how that can be because it's all quick connects. Any thoughts or ideas for me to look further into?? Could it be a faulty relay? That would be weird right out of the box.
__________________
trevor |
#24
|
||||
|
||||
Is the battery ground to the same place ??
|
#25
|
||||
|
||||
Quote:
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#26
|
||||
|
||||
Yes the battery ground is grounded to. The frame right next to the ignition coil ground. I have continuity between battery ground and frame
__________________
trevor |
#27
|
||||
|
||||
Quote:
Ok I'll give this a try when I get home from work tonight. A least ill know if the relay is working thx
__________________
trevor |
#28
|
||||
|
||||
I would try what Anders said first and then put a meter on the switch wires and see if you get voltage when you press the button. That will also help determine if you are getting power sent to the relay.
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
#29
|
||||
|
||||
Where does this go?
The relay did not click when I pushed the button so I will try it manually with the battery lead see if it will click, I also tried a second brand new starter switch incase it was that and had the same result
__________________
trevor |
#30
|
||||
|
||||
I asked a guy I know who has a 12 es which order the cable connected from battery , it wouldn't work , switched wires on relay and it worked , just waiting for some new wire to turn up so I can complete the install,
|
|
|