|
Enduro Product Announcements Announce new gasgas enduro products here - Vendors Welcome... |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Hammerhead Designs GG shifter
http://www.hdmoto.com/ProductDetails...uctCode=GGTMSL
Very cool. Price ($70) not too horrible for billet stuff. Not sure of the length. Different tip sizes. |
#2
|
||||
|
||||
I have one and it is longer, plus you can order tip to give you more room. I also got the long tip.
Issue: 1. Bent on first ride. Hit a wet root and the bike layed right down on that side. 2. The knurling on the tip is wearing fast. 3. I safety wired the tip, just in case. With that said, it is still way better than the stock shifter and I would buy it again.
__________________
2004 GasGas DE250 |
#3
|
||||
|
||||
Here is a pic of mine on my bike
__________________
2004 GasGas DE250 |
#4
|
||||
|
||||
+1. I have size 14 feet, and the Hammerhead works great. I've worn the anodization off of the tip, but i can always get a new tip cheap. I put one on my daughter's KTM 200, (her feet are big for a 14 year old girl), and it really made a big difference in her ability to find neutral.
Great products. blitz |
#5
|
||||
|
||||
For some reason, when I ordered one from GoFasters, they charged me $90 plus $10 for shipping
UPDATE>>> Mark has looked into it and credited my account the difference.
__________________
Jon '05 GG 300 DE (race bike) '06 KTM 450 XC (dual sport & supermoto) '09 GG 280 TXT (to learn on) '02 BMW R1150RT (for racking up the miles) Four wheels move the body, two wheels move the soul If everything seems under control, you're not going fast enough Last edited by sierrarider; 06-05-2009 at 11:41 AM. |
#6
|
||||
|
||||
Quote:
They have a new rubber tipped version now as well. http://www.hdmoto.com/SearchResults.asp?Cat=26
__________________
07 EC 300 (under 500 miles, selling soon) 97 KTM 250 EXC (sold) 2016 Trek Remedy 29er |
#7
|
||||
|
||||
Most importantly does it stay tight on the selector shaft?
|
#8
|
||||
|
||||
Mine Has. I installed it in Sept. Last year with a bit of blue loctite, and i've had no need to tighten it since.
|
#9
|
||||
|
||||
I have had to retighten mine a few times. I may try some blue loctite too.
__________________
2004 GasGas DE250 |
#10
|
||||
|
||||
I have one of the prototypes. I finally installed a longer bolt and put a jamb nut on the end to lock the bolt in.
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hammerhead shifter | steve | Enduro Product Reviews | 0 | 02-04-2009 05:32 AM |
RB Designs Carb Mod | Magellan | Enduro Product Reviews | 18 | 06-11-2008 01:44 PM |
Thanks to RB Designs & Gofasters | ejas | General Discussions & Announcements | 0 | 09-07-2007 05:10 AM |
RB Designs Carb Mod? | Boomhauer | Enduro Intake/Carburetion - 2 stroke | 4 | 03-20-2007 03:09 PM |
Welcome RB Designs... | webmaster | General Discussions & Announcements | 2 | 07-20-2006 08:37 AM |