Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-08-2017, 01:51 PM
Adam500 Adam500 is offline
Member
 
Join Date: Oct 2015
Posts: 56
Default powervalve spacer clearance

I have a Christini AWD with 2015 300 engine and E start in it.
I wanted to try the power valve spacer. How wide are they?
It looks like it be very close to hitting the starter if it were spaced out more than a half inch or so.
Do they fit the newer engines with E start?
Thanks.


Reply With Quote


  #2  
Old 01-08-2017, 08:31 PM
philm philm is offline
Member
 
Join Date: Jan 2015
Location: Newcastle, Australia
Posts: 93
Default

Quote:
Originally Posted by Adam500 View Post
I have a Christini AWD with 2015 300 engine and E start in it.
I wanted to try the power valve spacer. How wide are they?
It looks like it be very close to hitting the starter if it were spaced out more than a half inch or so.
Do they fit the newer engines with E start?
Thanks.
I don't believe that they fit the newer e start models. You might be able to get a thin one machined to fit but it might not make much of a difference.

Sent from my Moto G (4) using Tapatalk
__________________
2010 GasGas EC300 Nambo
Reply With Quote
  #3  
Old 01-08-2017, 08:36 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

You can always bump your ignition timing a few degrees for free. That will give you more bottom end and midrange. Listen for knock just in case but I have not had a problem with this on any of my bikes.
Reply With Quote
  #4  
Old 01-10-2017, 02:58 AM
SpirosZ1000's Avatar
SpirosZ1000 SpirosZ1000 is offline
Member
 
Join Date: Sep 2014
Location: Athens Greece
Posts: 78
Default

I have the spacer sold from motocrosscenter in my 2015 300 e start and it fits just fine.No problem with the starter at all.
Reply With Quote
  #5  
Old 01-10-2017, 04:21 AM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

Quote:
Originally Posted by SpirosZ1000 View Post
I have the spacer sold from motocrosscenter in my 2015 300 e start and it fits just fine.No problem with the starter at all.
Spiros, the '15 has an adjustable PV Have you adjusted this first before installing the spacer?
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending
Reply With Quote
  #6  
Old 01-13-2017, 11:25 PM
SpirosZ1000's Avatar
SpirosZ1000 SpirosZ1000 is offline
Member
 
Join Date: Sep 2014
Location: Athens Greece
Posts: 78
Default

Yes I have adjusted the pv.I have turned the screw from 2 turns out (standard) to 2,5 turns out because I want a more aggressive throttle response (like my 06 300 had )
Apart from that the spacer will benefit you in low revs whatever setting you choose for the pv.
Reply With Quote
  #7  
Old 04-13-2017, 07:47 PM
Adam500 Adam500 is offline
Member
 
Join Date: Oct 2015
Posts: 56
Default

So the spacer from checkpoint offroad DOES fit the 2015 300 engine with the e start. BARLEY!!! But it does!
Noticed absolutely no difference in power at all.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clearance with a smaller silencer celler Enduro Engine - 2 stroke 2 03-04-2013 09:36 AM
Valve Clearance (Tolerance) Quicky1980 Enduro Engine 4 stroke (including EFI & Exhaust) 7 02-15-2013 12:44 PM
Graphics Clearance Harry Enduro Chassis & Body 1 11-26-2012 09:29 PM
powervalve clearance jeffs2200 Enduro Engine - 2 stroke 13 08-31-2012 10:44 AM




All times are GMT -5. The time now is 07:51 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org