Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Other Bikes... > Other GasGas Bikes/Quads

Other GasGas Bikes/Quads Trials, Pampera, Wild HP, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-17-2016, 11:40 AM
billybob69 billybob69 is offline
Member
 
Join Date: Dec 2016
Posts: 4
Default EC250F vs EC250 Cami

Hi all,

I?m looking for a replacement for my Honda CRF230F and a considering a circa. 2014 Gasser.

As I?m relatively short (5ft 6?) and light, a bike that has a lower seat height and is relatively light is a definite bonus for me.

Initially the Cami seemed ideal for me, but I do get nervous about the Chinese made engine (from what I can tell it is made by a company called Zongshen). Are there any UK based Cami owners on the forum - have you ever needed to order any engine parts and did you experience any difficulties in getting them?

Then I started to look at the EC250F. Again it looked good as it has a Yamaha WR250F engine in it, but it seems that it has slightly longer forks and shocks which takes the seat height to 960mm ? making it one of the tallest greenlaners on the market. However it is much lighter at 108kg.

Any feedback of the Cami vs the EC250F is much appreciated.

One last question; am I right in thinking that the frame, plastics, auxiliaries etc are likely to be the same across the 2014 4s range?

Thanks in advance for any replies.


Reply With Quote


  #2  
Old 12-18-2016, 09:36 AM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

I'd go with the EC250F
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending
Reply With Quote
  #3  
Old 12-18-2016, 10:14 AM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

Rather than the Cami you might want to take a close look at the AJP bikes from Portugal. I talked to a former GasGas owner who has one and he loves it.
Reply With Quote
  #4  
Old 12-21-2016, 03:50 AM
billybob69 billybob69 is offline
Member
 
Join Date: Dec 2016
Posts: 4
Default

Thanks for the replies.

Quote:
Originally Posted by Rod Overstreet View Post
Interesting dilemma, comparing one dead horse to another.

EC250F and Cami are both non-supported bikes now
but if forced to pick between those 2, I would go with EC250F simply because of the Yamaha engine. Yes its tall, but that is easily fixed. But with Cami, while shorter, its heavy, underpowered and under suspended.

The jury is still out on AJP long term durability. They're tall, and rather cobby looking when you get up close but...listening to their riders, they really like the bikes. Like Gasser, I have a buddy down in TN who bought one and loves it...for what it is.

Overall, if I were looking for a semi-serious 4 stroke that was going to be used at a C class level and value price between the 3 listed? It would be AJP, but...why not consider an EC two stroke model? It can be lowered, power mellowed out some and still have plenty of power on tap. Keep in mind, I', 5'6 too and once the sag is properly set...I have no problems other than not having the guts to pull the throttle back far enough
Can you explain what you mean by "non-supported" bikes now. Do you mean that the bikes are no longer made? But I'm assuming that you can still get parts for them? Engines, forks n shocks apart, the rest of the bike(s) look interchangeable with other GG 4s. Is that not the case?

Yeah, I've already had a look at an AJP, like you I came to the conclusion that they were tall and the build quality didn't seem up to the standard of a Gasser.

If I went down the route of a low seat height, mellow 2 stroke I think that I just plump for the ready made version - a KTM 250R Freeride :-)
Reply With Quote
  #5  
Old 12-21-2016, 04:08 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Quote:
Originally Posted by billybob69 View Post
Thanks for the replies.

Can you explain what you mean by "non-supported" bikes now. Do you mean that the bikes are no longer made? But I'm assuming that you can still get parts for them? Engines, forks n shocks apart, the rest of the bike(s) look interchangeable with other GG 4s. Is that not the case?
Correct, none of these bikes are made now. But that shouldn't keep you off buying them (at least not the EC250F). While I don't know the Cami (I have never seen one here in my part of the world), the EC250F is, for all practical purposes, a standard Yamaha engine in a standard Gasgas chassis. Getting parts for either should be no problem. Gasgas did change some small details around the Yamaha engine (adding a hydraulic clutch and removing the dry sump oil tank), but that shouldn't make any problems parts-wise.
In your case, I would go with the 250F.
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #6  
Old 12-21-2016, 05:06 AM
Leo's Avatar
Leo Leo is offline
Senior Member
 
Join Date: Sep 2008
Posts: 499
Default

That's why GasGas need a EC200 2T.
__________________
www.endurohp.eng.br
Sherco ST300 2015 (Trials)
https://www.instagram.com/leocm74/
Brasil!
Reply With Quote
  #7  
Old 12-21-2016, 06:00 AM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

Quote:
Originally Posted by Leo View Post
That's why GasGas need a EC200 2T.
+1 I'm with Leo
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending
Reply With Quote
  #8  
Old 12-21-2016, 06:44 PM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

Quote:
Originally Posted by billybob69 View Post
Thanks for the replies.




If I went down the route of a low seat height, mellow 2 stroke I think that I just plump for the ready made version - a KTM 250R Freeride :-)
The KTM Freeride is a weird apple I.M.H.O. The bike is very tall relative to its length(due to way too much ground clearence), no engine power valve, and way too expensive. The Beta Xtrainer is a much better all around bike for most trail riders (freeride is closer to a trials bike).
Reply With Quote
  #9  
Old 12-21-2016, 07:36 PM
rvangeel rvangeel is offline
Senior Member
 
Join Date: Oct 2015
Location: Ontario, Canada
Posts: 102
Default

What about a 2 stroke 200 or 250? You mentioned that you are 5'6" and light. I am 5'7" and 125 lbs. I've had a KTM 250XCFW back in 2008 and didn't like it. It was too heavy and not enough snap in the motor to lift the front wheel when you need to. Before my gasser I've owned two KTM 200's. I was going to get another KTM 200 or 250 when I came across a great deal on an EC250. I lowered it 1.5" front and rear and love it. I can touch the ground flat footed which gives a lot of confidence in the technical sections. The motor is super smooth and added power over my 200 is icing on the cake when climbing hills.


Sent from my iPhone using Tapatalk
Reply With Quote
  #10  
Old 12-21-2016, 07:40 PM
rvangeel rvangeel is offline
Senior Member
 
Join Date: Oct 2015
Location: Ontario, Canada
Posts: 102
Default

Forgot to mention: a 2 stroke is much easier and cheaper to maintain. If you are looking at used bikes, purchasing a 4 stroke bike, it could be minutes away from a complete rebuild that would cost a pretty penny. Worst case scenario with a 2 stroke rebuild would probably be half the cost of the 4 stroke rebuild.


Sent from my iPhone using Tapatalk
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas Gas Cami ES250 deano 45 General Discussions & Announcements 2 07-23-2014 06:30 AM
GG Cami 250 test gasgasman Enduro Product Reviews 0 06-03-2014 08:36 PM
NEW. GASGAS Cami 250F Leo General Discussions & Announcements 66 04-08-2014 11:10 AM
GasGas CAMI 250 gasgasman Enduro Product Announcements 1 02-19-2014 10:48 PM




All times are GMT -5. The time now is 06:56 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org