|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Leak down test
Hey guys. I have been reading the site for years and it has to be the classiest forum on the internet. I just rebuilt the top and bottom end on my 2001 EC300. After getting it back together, it is very weak. No mid or top. It sputters when trying to rev. It has to be push started to crank it. I used new gaskets and seals, but it seems like a possible air leak. Is there any way to leak down test this bike? It has great compression also. Any ideas or help would be greatly appreciated.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Weird one - oil leak | blitz11 | Enduro Engine - 2 stroke | 2 | 09-25-2012 12:12 PM |
Leak leak leak... | AnthGG | Enduro Engine - 2 stroke | 4 | 12-15-2011 08:10 PM |
07 clutch leak | mountain thumper | Enduro Engine - 2 stroke | 6 | 07-06-2008 11:18 PM |
Voltage leak | nitroman | Enduro Engine 4 stroke (including EFI & Exhaust) | 8 | 04-13-2008 06:05 AM |
Gas cap leak? | colinmc400 | Enduro Chassis & Body | 6 | 05-21-2007 07:09 AM |