|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
2007 GasGas to KYB SSS forks
Hi Guys
I am looking to do a fork swap on my 2007 GASGAS 300 to KYB SSS. I picked up a a lower and upper GASGAS triple clamps for 48 Sachs forks so right now just trying to get the parts to make the swap. I read all the threads I could find on this. Looking for info on the spacers or even better if someone is interested in making and selling me a set would be ideal. I would like use the GASGAS wheel or I can buy a YZ wheel if it makes things easier for the axle but I am guessing a bearing change would sort that out. Any advise would be great. Thanks Scott
__________________
Current: 2007 GASGAS 300EC 2004 KTM 250 SX 2003 YZ450F |
#2
|
|||
|
|||
PM Twowheels on the forum. He will be able to sort you out
__________________
2003 txt250 Pro 2013 Ossa 280i |
#3
|
||||
|
||||
Perfect thanks, I think the spacer will be my only problem.
__________________
Current: 2007 GASGAS 300EC 2004 KTM 250 SX 2003 YZ450F |
#4
|
|||
|
|||
nope, he made those for me as well
I am based on the other side of the world and did not want (or have the facilities available) to measure and machine any parts. I sourced the forks off ebay and sent them direct to Steve, we discussed the desired end result and after a while i received a revalved set of forks, a yz axle, correct spacers, a brake caliper bracket (from braking.com) and a resized top GG triple clamp. End result was that i did not need to change the brakes, wheel, wheel bearings, seals, or triple clamp bearings
__________________
2003 txt250 Pro 2013 Ossa 280i |
#5
|
||||
|
||||
From what I have gathered using the GASGAS clamps makes the most sense over changing the clamps to YZ and adding a stop. So I think all I really need now is the axle, spacers and the caliper bracket. I do have a 2000 426 yzf parts bike not sure if any of the parts on it are use able. Has anyone swapped over a yz caliper over using a bracket on the caliper?
__________________
Current: 2007 GASGAS 300EC 2004 KTM 250 SX 2003 YZ450F |
#6
|
|||
|
|||
Quote:
__________________
2003 txt250 Pro 2013 Ossa 280i |
#7
|
|||
|
|||
I changed mine now. I went back from the YZ tripple clamp to the original gasgas. I machined the clamping diameters to fit the KYB SSS
Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators |
#8
|
||||
|
||||
Can anyone confirm the head stem bearing sizes so I can get those ordered?
Thanks Scott
__________________
Current: 2007 GASGAS 300EC 2004 KTM 250 SX 2003 YZ450F |
#9
|
|||
|
|||
All balls has a section on their website that has bearings sizes for conversions
__________________
2003 txt250 Pro 2013 Ossa 280i |
#10
|
||||
|
||||
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EC300 2007 Front wheel not centered in forks | Paynebrody | Enduro Chassis & Body | 1 | 01-12-2016 07:37 AM |
EC300 2007 New forks | stian | Enduro Suspension | 10 | 06-05-2014 10:37 AM |
WTB Forks 02 GasGas XC 300 | Mike Leach | Parts | 3 | 04-08-2013 10:46 AM |