|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
FSE 06 will not fire
I have an issue,
I started my FSE450-06 the other week no problems, 2 days later, I turn the key and the fuel pump noice/sound is very very faint, but bike fire and runs fine, next day try to get it to fire and all it will do is turn over and make a loud pop out the exhaust. I changed the sparkplug no joy, I checked the relays all is well. Took it to a gas gas dealer he plugs in computer and it says all is fine, they start looking for things contact importer and thay get them to check a few thinks, seem to think it is the crank senser, still waiting for it to arrive from OS. Do you think the lack of fuel pump noise / pressure might play a part as it has been pushed into the corner of the workshop until the senser turns up. Has anyone else had this issue. |
#2
|
||||
|
||||
If the fuel pump doesnt come on when the key is turned on then i would go back to the relay.
__________________
Dont follow me, You wont make it. |
#3
|
|||
|
|||
It comes on but is quite, were you would hear it when sitting on the bike before.
Have replaced both relays also |
#4
|
||||
|
||||
Sorry for stating perhaps obvious things: Fuel?
My pump sounds strange when out of fuel. |
#5
|
|||
|
|||
It was a crank angle senser and temp senser that were shot, all good now had to wait for the senser to come from spain
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
KTM Rider Catches On Fire | Boomhauer | General Discussions & Announcements | 1 | 10-06-2007 03:54 AM |