GAS GAS 04 FSE 450 flywheel puller HELP

[chaddlez]

Hi Guys,

been searching for a flywheel puller of my bike but unsure what size will fit have read that i need a 30mm x 1.5 but then other posts have said 31mm?????? any help would be greatly appreciated,

Cheers,
Chad

[Sfdemo]

I will check tonight, I believe it is the Kokosan model that fits KTM bikes, but it was hard to find a listing. I believe it is M33x1.5 Right Hand Thread, internal model. That is what I bought.

[chaddlez]

WOW 33MM where do u get this information from anyways? ive read through the manual and it doesnt state any sizing

[chaddlez]

is your bike 450 04???

[Sfdemo]

2003 450

[chaddlez]

has yours got the ducati Flywheel?

[chaddlez]

can u confirm if its 33mm?

[Tafka]

I have a 2005 FSE450 with ducati flywheel/stator and i have M30x1,5 thread! In the partslist diagram the 2004 and 2005 have the same code flywheel, so it should be M30x1,5.
Just made my own puller but GasGas part number for the puller is MFS400134045
Drawing if interested https://drive.google.com/file/d/0B28...ew?usp=sharing

[chaddlez]

thanks Tafka yeh found a puller last week which was 30mm x 1.5 all pulled off now cheers for confirmation now ive gotta find a replacement stator

[Tafka]

If you are in Europe i recommend motocrosscenter.com ....they have many engines for braking and prices are very good!
You can email Antonio directly....email is: [his name]@motocrosscenter.com