Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-02-2010, 02:53 AM
GG27 GG27 is offline
Senior Member
 
Join Date: Feb 2008
Location: Athens Greece
Posts: 118
Default KTM EXC 450 2008 to EC250 2010

I want your opinion on me trading my KTM for a low hour EC250 2010.

The four stroke is tiring in the tight stuff but way better when out in the open. I used to have a EC250 2008 which I liked but didn't ever get the suspesion dialled. This will be a straight swap. Is it worth it?


__________________
EC250 2008 Skid plate, rad braces, Fork bleeders
Drz 400 Motard '03 (full spec)

Yz 250 '06, KTM exc 250 '05, exc 250 '04, exc 250 '02
WRF250 '02, KDX 220 '98, DT200R '93 all sold
Reply With Quote


  #2  
Old 07-02-2010, 06:48 AM
twowheels's Avatar
twowheels twowheels is offline
Senior Member
 
Join Date: Oct 2009
Location: Dearborn MI
Posts: 1,860
Default

Assuming that you're talking about a two-stroke 250 I can't believe the deal isn't already done! You'll love the 2010 Gasser.
__________________
Steven Beane #275
PlusOnePerformance - Superior Service the World Over - Dearborn MI
AMA District 14 (Michigan) Officer

afterhourscycle.com
Michigan's Beta and TM Race Headquarters
Reply With Quote
  #3  
Old 07-02-2010, 09:38 AM
Rod Overstreet Rod Overstreet is offline
Platinum Level Site Supporter
 
Join Date: Mar 2010
Posts: 862
Default Trade!!!

Pretty much a "no brainer". Trade before the other guy changes his mind!
Reply With Quote
  #4  
Old 07-02-2010, 10:00 AM
GG27 GG27 is offline
Senior Member
 
Join Date: Feb 2008
Location: Athens Greece
Posts: 118
Default

Yeah its a 2 stroke, it has a skid plate, rad braces and one of those hand made exhausts. I just am worried on the after sale value of the GG compared to the KTM.
I have ridden the 2010 racing model and found the suspension too stiff.

Will the newer model be suitable for hare scrambles and natural MX tracks?

Thanks
__________________
EC250 2008 Skid plate, rad braces, Fork bleeders
Drz 400 Motard '03 (full spec)

Yz 250 '06, KTM exc 250 '05, exc 250 '04, exc 250 '02
WRF250 '02, KDX 220 '98, DT200R '93 all sold
Reply With Quote
  #5  
Old 07-02-2010, 10:34 AM
Skidad's Avatar
Skidad Skidad is offline
Senior Member
 
Join Date: Dec 2007
Location: Littleton Massachusetts
Posts: 1,209
Default

2008 was the first year KTM went to the split oil system with the new motor for the EXC (and XCW in the US). Plenty of ongoing problems/issues with that motor and if you ask me it's a ticking time bomb. Trade it ASAP for the GG and let the new owner worry about the huge repair bill when it self destructs. Trust me GG resale wont look so bad when you see the price to fix a blown KTM motor (or any 4 stroke motor really).

Note...I'm no KTM hater at all and have no ax to grind like so many. It's just that motor was not one of KTM's better efforts and probably was put into production to soon. The 2010 version is better but personally I still wouldn't touch one. Their 250 motor and the big SXF motors are great.
__________________
07 EC 300 (under 500 miles, selling soon)
97 KTM 250 EXC (sold)
2016 Trek Remedy 29er
Reply With Quote
  #6  
Old 07-04-2010, 12:02 AM
GG27 GG27 is offline
Senior Member
 
Join Date: Feb 2008
Location: Athens Greece
Posts: 118
Default

The previous owner had done all the engine mods, updated to 2010 specs and had done only 10 hours before he sold it to me.
I just added the Dirt Tricks tensioner, I can say i am surprised at the agility the 450 has but still no comparison to the GG250.
I know I can go much faster on the EC in the tight stuff, I just couldn't get it dialed for bigger hits due to the front forks. Do the 2010 Sachs forks take big hits as well as the WP's, and in your opinion what other improvements over the 2008 Gasgas models are worthwhile noting?.
__________________
EC250 2008 Skid plate, rad braces, Fork bleeders
Drz 400 Motard '03 (full spec)

Yz 250 '06, KTM exc 250 '05, exc 250 '04, exc 250 '02
WRF250 '02, KDX 220 '98, DT200R '93 all sold
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 Gas Gas EC250 Six Days cladoo Enduro Product Announcements 29 11-03-2010 05:09 AM
footrests for 2008 ec250 mattdenn Enduro Chassis & Body 1 08-13-2010 03:51 PM
2010 EC250 Jetting WTEC Enduro Intake/Carburetion - 2 stroke 1 03-26-2010 09:41 AM
2008 vs. 2010 Kurdt General Discussions & Announcements 8 03-08-2010 03:46 PM




All times are GMT -5. The time now is 05:22 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org