Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-08-2017, 06:24 AM
welsh.Z.S. welsh.Z.S. is offline
Member
 
Join Date: Oct 2016
Posts: 73
Default How to remove clocks

On my 09 EC 125 I have the red rectangular clocks , but they've never worked since I had the bike , how do the clocks come off so I can maybe try changing the batteries etc


Reply With Quote


  #2  
Old 05-08-2017, 07:27 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Quote:
Originally Posted by welsh.Z.S. View Post
On my 09 EC 125 I have the red rectangular clocks , but they've never worked since I had the bike , how do the clocks come off so I can maybe try changing the batteries etc
The bracket is fixed to the top triple clamps with a couple of M5(?) screws. If you undo them, I think you will figure out the rest.
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #3  
Old 08-23-2017, 09:15 AM
welsh.Z.S. welsh.Z.S. is offline
Member
 
Join Date: Oct 2016
Posts: 73
Default

I need to remove the headlight assembly to get to this but I can't seem to work out how to remove it 🙄😂
Reply With Quote
  #4  
Old 08-24-2017, 01:32 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

The headlight is fastened by rubber bands around the fork legs. Undo the two rubber bands at the top and the headlight assembly can be lifted up / forward.
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #5  
Old 08-24-2017, 07:25 AM
_Hammy _Hammy is offline
Member
 
Join Date: Jun 2013
Posts: 43
Default

You can also probably remove the battery from the underside of the speedo using a coin once the headlight is off


Sent from my iPhone using Tapatalk
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can I remove my EFI and install a Carb? safetythird Enduro Engine 4 stroke (including EFI & Exhaust) 9 10-08-2015 05:14 AM
How to remove Flywheel? Fabry Enduro Engine - 2 stroke 12 08-16-2013 03:27 PM
How do I change the clocks from KPH to MPH KTMAndy Enduro Electrical & Wiring 5 04-20-2012 06:28 PM
EC200 06 Clocks jamesfordham Enduro Electrical & Wiring 9 04-20-2012 03:40 PM
how do you remove the kickstart noobi Enduro Chassis & Body 13 09-22-2011 03:31 PM




All times are GMT -5. The time now is 10:14 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org