Will this chain guide fit 06?

[motopsycho87]

http://www.motocrosscenter.com/shop/...de&results=252

Starting to dislike the roller bearing one, will this one fit? If not, what else is there for a reasonable price in the UK?

[shang]

Your link didn't open the chain guide for me. But, I can tell you that my 2013 and 2006 300's both share the same swing arm and the sliders and guides cross over.

[(F5)]

The roller one is pretty useless. I put a late model one on so that'll probably work. I did have to ovalise holes due to my rear sprkt size.

[rvangeel]

Yes. That one will fit. I just put it on my 2005. I just had to get two M8 socket head cap screws to mount it. The old chain guide used hex head bolts that didn't fit into the new guide.



Sent from my iPhone using Tapatalk

[motopsycho87]

Originally Posted by rvangeel

Yes. That one will fit. I just put it on my 2005. I just had to get two M8 socket head cap screws to mount it. The old chain guide used hex head bolts that didn't fit into the new guide.

Awesome, have ordered the kit. Do you know what length m8 bolt you used? I've got a bunch of m8x25 stainless kicking about

[rvangeel]

They should work. I think I used 15mm long but another 10mm should be fine.


Sent from my iPhone using Tapatalk