|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Side Stand Fix GG
OK I know I am not the only one with a side stand braking off the frame with no way of making it work or last if welded back is there any one making a replacement side stand for GGs?????
Last edited by dualsportutah.com; 08-11-2011 at 11:48 AM. Reason: change title |
#2
|
||||
|
||||
Quote:
http://www.gasgasrider.org/forum/showthread.php?t=9710
__________________
broken down over 60 slow rider.. |
#3
|
||||
|
||||
Quote:
off looks like it might work time will tell But still looking for a better Idea thanks |
#4
|
|||
|
|||
I broke my lower roller/ kickstand tab(welded to frame) the first day I rode the bike. I welded it twice at the failure point just past the gussets and it subsequently broke twice right next to my welds.
I now just ride with no lower roller or kickstand. Incredibly poor design with what I think is a cast(?) tab, which is what makes welding it ineffective at the thin failure point by the bolt hole. If the bike did not have other redeeming qualities, I would have sold it the same week I bought it. I hope the rest of the frame, welds and "tabs" hold up better.... jz Last edited by coachtech; 08-11-2011 at 11:02 PM. |
#5
|
||||
|
||||
:(
Mine broke as well. Got a new bracket and was able to remount despite the roller bracket being busted. Sounds like it might not last
Was thinking about having the roller bracket rewelded-thanks for the info! Guess I wont as it sounds like it is a waste of time/money.
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#6
|
||||
|
||||
They must have changed the stand bracket on the newer models, both of my 07's have been well used and the stands have never given any issues, maybe try finding a stand bracket from an older model and mounting that?
|
#7
|
||||
|
||||
Quote:
I can't put any pics up put give me a cell # I can tex a pick to you can see |
#8
|
|||
|
|||
Quote:
jz Last edited by coachtech; 08-14-2011 at 05:52 PM. |
#9
|
||||
|
||||
What does yours do, just reinforce the mount?
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day. |
#10
|
||||
|
||||
I think one of the reasons the bracket breaks is a roller bolt not properly torqued in combination with letting the sidestand swing up without holding it. This puts an enormous stress on bracket.
I made a new piece of bracket out of 3 mm steel(a bit thicker than original bracket), and grinded out the center flat part of old one, leaving the flanges to weld it to. I have also removed the large diameter return spring. It has held up for a few months now. Check your roller bolt torque. I have no photos, but i made a "drawing" |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
the side stand | brit | Enduro Chassis & Body | 3 | 10-26-2010 08:34 AM |
08' side stand? | nick790 | Enduro Chassis & Body | 11 | 05-13-2009 07:38 PM |
side stand mods | ricardo cabeza | General Discussions & Announcements | 8 | 03-24-2007 03:45 PM |
Side Stand Mod, help needed | speno | Enduro Chassis & Body | 5 | 12-10-2006 12:38 AM |