|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#31
|
||||
|
||||
Good luck and looking forward to the next update.
|
#32
|
||||
|
||||
Did the re-valve this past week and took it out Sunday on our work day for our race. Didn't really get to hammer it much but I did get some idea of how it feels now.
I figured this was going to be a lot softer but it wasn't. I set the clickers at full out so I could compare it directly with what I had been running. Seems to soak up trail junk now but I was having some sketchy moments of it. Had to slow the rebound by 3 clicks to get it under control. So, PFP full out, compression full out, rebound 23 clicks in. While I am at extremes, it feels pretty good. This coming weekend I'll be back to my normal testing ground so I'll get a better feel for how it's actually working..
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#33
|
|||
|
|||
Quote:
Hopefully someone with more knowledge will chime in. Unfortunately if you flip the compression valve over and reverse the shim stack you may have to start at ground 0 and then revalve from there to your liking. I have watched your video several times as I am having issues of my own. I had a shop replace seals, bushings and they revalved as well. It feels like there is some kind of binding or hydro lock going on in mine. The first inch or so seems to take alot of force to start moving the forks down in the stroke. I have removed some compression shims that they put in but the issue persists. My forks were also shortened 30mm beforeaI bought them so it may complicate my issue. Although I used them for 3 years and they seemed to work much better than they do now. I'm not sure what my next step will be with my forks, but the deflection I'm getting now is taking the joy out of riding my dirt bike. Last edited by kenfm2000; 06-07-2020 at 11:23 AM. |
#34
|
||||
|
||||
Like I mentioned on Youtube, I'm not sure which direction the base valve should sit. I just put it back in the way I pulled it out. Yes, hopefully someone with more knowledge will chime in and confirm whether my setup is correct or not. I have another set of the 48 PFP's but haven't disassembled them yet to take a look.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Suspension advice please | SS109 | Enduro Suspension | 15 | 05-19-2018 02:04 AM |
Suspension advice | motopsycho87 | Enduro Suspension | 4 | 03-31-2016 10:02 AM |
Suspension Tuning 101 | MattR | Enduro Suspension | 3 | 06-21-2013 10:50 PM |
Need Suspension Advice | ggrider94 | Enduro Suspension | 5 | 06-12-2013 08:34 PM |
Newbie GasGas owner / help with suspension tuning | SingleTrackMind | Enduro Suspension | 23 | 06-18-2012 07:09 PM |