Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-03-2007, 11:50 PM
d2w's Avatar
d2w d2w is offline
Senior Member
 
Join Date: Jul 2006
Location: Summerland, B.C., Canada
Posts: 102
Question Source of carb vent filters?

Someone mentioned on this forum that they used minature air filters on the four vent lines of their carb. Since these lines vent the carb, it seems like a good additional way to keep dirt/grit out of the carb.

I searched for the original post, but I couldn't find it.

Does anyone have a manufacturer/model number of a suitable miniature air filter?

Thanks.

Dale


Reply With Quote


  #2  
Old 03-04-2007, 09:24 AM
Dave Dave is offline
Senior Member
 
Join Date: Jul 2006
Location: StL, MO
Posts: 392
Default

I recall a thread mentioning the use of 35mm film canisters with foam inside. Maybe team Gas Gas used this configuration?
Reply With Quote
  #3  
Old 03-10-2007, 08:23 AM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default

For the vents routed to the airbox, I used a small medicine container. You could use a 35mm film container too. Just put a hole in the bottom and route your vent tubes into the container. I put some pillow stuffing inside the bottle to filter, but some foam would do the same. Then, I put the cap on which had a hole in it so it could breathe.

Here is a pic of mine installed.
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
Reply With Quote
  #4  
Old 03-12-2007, 06:43 AM
iancp5's Avatar
iancp5 iancp5 is offline
Senior Member
 
Join Date: Aug 2006
Location: U.K.
Posts: 829
Default

To think I just shove 2 pipes in the airbox and leave 2 dangling without filters
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Uni Filters for 2010 Rod Overstreet Enduro Intake/Carburetion - 2 stroke 5 07-09-2010 11:15 AM
Ohlins parts source? widebear Enduro Suspension 2 04-02-2009 01:31 PM
AFE Air filters roostafish Enduro Product Reviews 8 03-21-2008 03:17 PM
Carb Vent Tube Diameter/Size? Captccb General Discussions & Announcements 1 11-05-2007 02:36 PM




All times are GMT -5. The time now is 11:45 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org