Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-28-2008, 05:41 PM
fury1's Avatar
fury1 fury1 is offline
Senior Member
 
Join Date: Jul 2006
Posts: 491
Default 2005 EC200 jetting help

got a new to me 2005 gasser 200,took out the carb to see what jetting it had,couldnt make out anything on the needle,I assume its stock,it had a 180 main and 40 for jets ?does that sound right,havent started it yet,just sorting some things out,needs a pipe and the kicker ratchet stuff replaced like my 300 needs to have fixed also also looked like the float was way too low when you turned the carb upside down wasnt even close to parallel like im pretty sure its supposed to be,also had a br7e plug,I put in a br8eg which I think is stock,havent been on a 200 in a while,put my 06 yellow plastic on it to spruce it up a little,has the dual map ignition and the wires are connected(not sure what setting that is)


Reply With Quote


  #2  
Old 11-30-2008, 02:31 PM
iancp5's Avatar
iancp5 iancp5 is offline
Senior Member
 
Join Date: Aug 2006
Location: U.K.
Posts: 829
Default

I have an 04. At 0 - 1000 ft, temp 5 - 10 deg C

I'm running 42p, 178m, N1EE needle on #2, slide #6.
Reply With Quote
  #3  
Old 11-30-2008, 05:06 PM
fury1's Avatar
fury1 fury1 is offline
Senior Member
 
Join Date: Jul 2006
Posts: 491
Default

ok thanks,Ill see how it runs before and after messing around some
Reply With Quote
  #4  
Old 12-01-2008, 07:13 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

What was Billy Burns running? The 200 is the one size GG I never jetted, but I would assume it would want to be slightly richer across the board than the 250.
Reply With Quote
  #5  
Old 12-01-2008, 08:32 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

If I remember correctly he said he was running 178M, 42P, LTR needle #2, and that was during July.
__________________
2004 GasGas DE250
Reply With Quote
  #6  
Old 12-01-2008, 01:35 PM
fury1's Avatar
fury1 fury1 is offline
Senior Member
 
Join Date: Jul 2006
Posts: 491
Default

bike ran great with the stuff thats in it,no loading up at all and it was cold out! tells me it must be rich in the warm weather
Reply With Quote
  #7  
Old 12-01-2008, 03:27 PM
fury1's Avatar
fury1 fury1 is offline
Senior Member
 
Join Date: Jul 2006
Posts: 491
Default

heres a few pics of the 2hunny with my old yellow plastic on it



Reply With Quote
  #8  
Old 12-01-2008, 05:10 PM
motownmangler motownmangler is offline
Member
 
Join Date: Nov 2008
Posts: 16
Default

looks fantastic! what color was the original plastic? I thought they all were yellow?
Reply With Quote
  #9  
Old 12-01-2008, 05:45 PM
fury1's Avatar
fury1 fury1 is offline
Senior Member
 
Join Date: Jul 2006
Posts: 491
Default

was yellow,no graphics anywhere and not so nice still worth a grand
Reply With Quote
  #10  
Old 12-01-2008, 06:21 PM
skid jackson skid jackson is offline
Senior Member
 
Join Date: Jul 2006
Location: NH, USA
Posts: 1,057
Default

a needle with no Id on it might be an ltr needle as I believe les ground off the id because i think he changed it around a bit. Not 100% on that tho.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
where to go from here. jetting q. dank Enduro Intake/Carburetion - 2 stroke 105 04-11-2011 04:25 PM
2005 DE250 Jetting the eel Enduro Intake/Carburetion - 2 stroke 3 09-02-2006 04:53 PM




All times are GMT -5. The time now is 10:29 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org