|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
2014 ec300r suspension setup for 230lbser
Hey Guys
This is my first post. Picked up a new to me bike a couple of weeks ago. I have close to 10hrs on it. Getting things dialed in. But I?m have trouble finding springs and recommend rates. Can anyone recommend a good spring rate to swap in for my weight and where to source them in Canada. I?m about 230lbs with no gear and I?m not a stupidly aggressive rider. The bike has Marzocchi 48 forks and the Reiger rear shock. Thanks Joe |
#2
|
||||
|
||||
No info at all?
__________________
2014 ec300r |
#3
|
||||
|
||||
There is a list of reccomend spring rates in your user's manual. You can find it at the Gasgas website.
I'm at the Phone at the moment so unable to give you a link.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#4
|
||||
|
||||
Yea I have the manual. It only goes up to 95kg. Which I guess is probably close.
And where do you get the springs from?? Joe
__________________
2014 ec300r |
#5
|
||||
|
||||
I bought the rear spring directly from Reiger. Very friendly people, not expensive either. I think I payed 80 euro. Plus tax.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#6
|
||||
|
||||
Cool thanks for the tip on but direct from Reiger
__________________
2014 ec300r |
#7
|
||||
|
||||
On the other hand, other springs may fit. I posted the dimensions of Reiger springs in another thread a week or two ago. If you have KYB or Showa springs available, you could check. I think Racetech has spring dimensions on their website.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#8
|
|||
|
|||
I had a KYB spring on my Reiger shock. At 230lvs you will need a 6.4 or 6.5kg rear spring and .48 or .50 fork springs. I recommend going to FB and looking up Richard Wilson on one of the GG pages. He makes springs just for GG.
Sent from my iPhone using Tapatalk |
#9
|
||||
|
||||
Thanks I sent him an email
Joe
__________________
2014 ec300r |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2014 Gas Gas EC300R | n_green | Enduro Product Reviews | 55 | 07-14-2014 09:28 AM |
Suspension setup for FSE 450. Who can work on this bike? | olderandyzer | Enduro Suspension | 1 | 05-27-2013 09:35 PM |
what suspension shop is good with GG setup | seamonster | Enduro Suspension | 17 | 02-16-2012 06:44 AM |
EC 300 Suspension setup for motocross. | GasGasser | Enduro Suspension | 10 | 08-02-2009 05:10 PM |
Suspension Database...Could you please add your setup? | wence | Enduro Suspension | 6 | 05-21-2009 05:38 AM |