|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2018 ec300 no start
New to me bike 21hours on it, was a massive pain to start hot or cold when I got it so I did the choke plunger mod, put a #40 pilot jet into it, set the floats, AS 1.5 out, new plug. Also did all the wiring updates for the starter etc.
Now I can't start it at all, no spark when I use the kick starter, but decent enough when estart is pressed (won't start on estart when cold I guess). I am new to 2 strokes but what could I be missing? I just want to ride the thing |
#2
|
||||
|
||||
Multi meter time!
Check the resistance for the stator, coil, and ht lead. Worth while checking the flywheel nut as well. A couple have had issues which resulted in the woodruff key sheering and timing going out. |
#3
|
|||
|
|||
Thanks, I'll crack into that today
|
#4
|
|||
|
|||
0.7ohms on the coil and 9.49(on 20k) on the plug lead.
Can't work out the stator wiring, the only workshop manual I can see has different coloured wires, so I'm abit stumped there. |
#5
|
|||
|
|||
Update:
Duh, duh, duh. CDI wasn't plugged in correctly! |
#6
|
|||
|
|||
Plugged from you? Did you work on it or it was from factory in that way?
|
#7
|
|||
|
|||
The bike had 20hours on it when I purchased it so no idea. I also disconnected the cdi whilst doing some checks, so it may have been my mistake!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Converting 2018 EC/GP to XC start switch | Keg | Enduro Electrical & Wiring | 6 | 02-28-2021 04:25 PM |
2018 ec300 | Fieds83 | Enduro Engine - 2 stroke | 11 | 07-11-2018 09:40 AM |
Reversing Start & Kill switches - 2018 | Gibnut | Enduro Electrical & Wiring | 7 | 05-16-2018 08:03 AM |
2018 YZ450 Electric Start Only-$9199.00 | Moto7man | All Other Bikes... | 4 | 06-16-2017 05:53 AM |
Three Year Head Start -- Parting out in 2018 | AZRickD | Parts | 2 | 07-10-2015 09:49 AM |