Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-28-2019, 07:09 AM
Cox76y Cox76y is offline
Senior Member
 
Join Date: Oct 2012
Posts: 223
Default Another smart carb question

Just wondering if anyone running a smartcarb on there ec300 could lend me some advice.
I have a 2018 ec300 with squish set running a 38mm smartcarb. Currently I am running the q11 rod in it. I am having problems with it in that to get a nice low idle it makes it way too rich everywhere else. Idle screw is at approx 1.3mm as suggested. Instructions in the manual suggest I run it at 80 clicks with this rod however this results in an idle thats way too high and hangs when coming off throttle. Seems good though everywhere else but idling.
To get a low idle I have to run it way richer than this. Not sure exactly how many clicks but it is a long way off 80 clicks as suggested.
I have 2 other rods here, an av11 and an q13. Does anyone know if either of these rods will have a richer idle section on the rod than the q11. I think the q13 will make it leaner everywhere else. Is this correct??
Thinking posibbly the av11 however unsure of the difference between the AV and the Q designation.
Anyone that is running this carb successfully on a 2018 model like to share there settings.?? I have tried speaking to Nathan at technology elevated however the time difference is a pain so Im hoping someone on this forum might be able to help..
thanks
JC


Reply With Quote


  #2  
Old 07-28-2019, 11:13 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

If it runs well on the metering rod and it's just idling a bit high just drop the slide down a bit with the idle adjustment.
Reply With Quote
  #3  
Old 07-29-2019, 06:46 AM
Cox76y Cox76y is offline
Senior Member
 
Join Date: Oct 2012
Posts: 223
Default

Hi Jakobi
thanks for the reply. I have tried that however it doesnt bring the idle down enough.. Maybe the av11 has a different taper at idle than the aq11. Might check it with the calipers.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
smart carb vendors dANbOT Enduro Intake/Carburetion - 2 stroke 10 07-30-2023 12:24 PM
Smart Carb finally came!!!! SpirosZ1000 Enduro Intake/Carburetion - 2 stroke 12 08-11-2018 11:09 AM
Powercdi and smart carb tps Cox76y Enduro Product Reviews 5 02-08-2018 11:17 PM
Smart carb question again Cox76y Enduro Intake/Carburetion - 2 stroke 2 01-20-2018 03:58 AM
Smart Carb 2stroke Enduro Intake/Carburetion - 2 stroke 28 05-05-2017 02:07 PM




All times are GMT -5. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org