Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 02-20-2020, 08:25 AM
TheTrojan TheTrojan is offline
Member
 
Join Date: Mar 2017
Posts: 6
Default Needed - 2013 EC 300 Clutch Slave Cylinder

Hi All

I am desperate for help! I'm trying to find a new or second hand clutch slave cylinder for me EC 300. The part number is ME25632026 and by the looks of the workshop manuals was the same part from 1996 to 2014.

My chain broke and tore up the casing. Now the fluid is just bypassing the seals.

Please can anyone help with contacts, even overseas, that I can try order from.

Thanks a million!!


Reply With Quote


  #2  
Old 02-20-2020, 12:52 PM
blitz11's Avatar
blitz11 blitz11 is offline
Silver Level Site Supporter
 
Join Date: Oct 2006
Location: SW Montana
Posts: 702
Default

In my quest to keep my 2002 running as long as possible, i spent time with the parts fiche.

You can still buy a slave cyclinder for US$105 from Gasgas. I think that the slave cylinders from 2015 onward, although not AJP, will also work with your bike.

The number of changes GG made to the engines of these bikes from 2002 - today is quite small. I was worried about parts availability, but "new" things should fit older bikes.
Reply With Quote
  #3  
Old 02-20-2020, 03:06 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

You could also use a Rekluse slave, I believe.
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #4  
Old 02-20-2020, 03:47 PM
risk74 risk74 is offline
Senior Member
 
Join Date: Jun 2016
Posts: 240
Default

PM sent. I have a slave cylinder in good working order from a 2011.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is it possible to convert clutch slave cylinder to dot4? jan_b Enduro Engine - 2 stroke 7 12-19-2014 12:01 PM
Will a KTM clutch hose fit the banjo bolt on my GG slave cylinder? bondo Enduro Chassis & Body 7 12-11-2014 12:53 PM
2010 250f clutch slave needed CACTUSREID Enduro Engine 4 stroke (including EFI & Exhaust) 0 01-30-2014 08:34 AM
clutch slave cylinder hydraulic seal Boodog Enduro Engine - 2 stroke 3 07-08-2013 05:45 PM
Clutch Slave Cylinder Rebuild newgaser Enduro Engine - 2 stroke 5 03-17-2012 08:30 AM




All times are GMT -5. The time now is 10:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org