|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Shared engines.
I own a ec300 from 2007 that I am totally satisfied with!
The problem that I am facing now is that I cant find spare parts (ignition cover) for my gasser! When I go into Motorcross Centre to find spare parts it only shows years from 2010 and forwards. Does anyone know what years share the same motor and parts. Thank you for all help. |
#2
|
||||
|
||||
Dude. There are despice manuals which I guess is Spanish for spares, check these out from links on this site and you can find part numbers and match years. There are a few people selling bits currently here.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#3
|
||||
|
||||
I would be very surprised if the 2010 ignition cover doesn't fit the 2007, but as our friend F5 says, check the spare parts manuals.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#4
|
|||
|
|||
What links are you referring to?
Suppose 05-13 has the same ignition cover because they share the same gasket. I?m going to be forced to fix it it myself with some proxy glue till they open up all the borders here in Europe. |
#5
|
||||
|
||||
That cover on my 99,01, and 02 gassers were the same shape and interchangable but at some point before 07 it changed shape - they eliminated the rounded hump in the upper right corner (the hump was there to accomodate a counterbalancer).
|
#6
|
|||
|
|||
do you remember if u had 3 or 4 bolts holding the cover on?
I found covers with 3 bolts, 4 bolts and with and without kickstarter (that it makes a difference) all with the same part number. Haha. |
#7
|
||||
|
||||
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
Tags |
ec300 2007, engine, ignition |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
07 FSR450 - do other engines fit? | Edm11 | Enduro Engine 4 stroke (including EFI & Exhaust) | 1 | 09-28-2015 08:37 PM |
HuskY engines on Gas Gas ?? | jdtriplett | General Discussions & Announcements | 36 | 03-04-2014 01:57 PM |
engines | jimjim | General Discussions & Announcements | 9 | 02-08-2013 02:54 PM |