GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-25-2009, 12:05 PM
sireid sireid is offline
Member
 
Join Date: Feb 2009
Posts: 7
Question EC200 kick start lever (2000 model)

Hi all,
The kick start lever on my Y2k EC200 model has become too worn to use effectively anymore. I notice from the Parts Crossover table, that the YZ250 model can be used on a GasGas but not sure which model.
Has anyone any knowledge of specific bikes that have an interchangeable kick start with my bike?
I've had it priced at £93 from GasGas uk delivered, which is a bit much just for a lever!!
Thanks in advance.

Si


Reply With Quote


  #2  
Old 03-25-2009, 12:27 PM
Eric K Eric K is offline
Senior Member
 
Join Date: Jul 2006
Posts: 546
Default

I fit a YZ kickstarter Yamaha Part No 5NX-15620-00 on my '01 XC300.
__________________
Eric K
'06 GasGas EC300
'01 GasGas XC300
Reply With Quote
  #3  
Old 03-26-2009, 11:31 AM
sireid sireid is offline
Member
 
Join Date: Feb 2009
Posts: 7
Default

Thanks for the tip Erik. Unfortunately the YZ lever has been quoted at near enough the same as the gasser version, so I'll just have to fork out the cash for the right one.
Look after your kick start lever is all I can advise!!
Cheers

Si
Reply With Quote
  #4  
Old 12-18-2009, 05:26 AM
jerseytrailrider jerseytrailrider is offline
Member
 
Join Date: Oct 2008
Location: Ringwood, NJ
Posts: 8
Default

Did you like the YZ kickstarter better than the stock one. I also heard a KTM kickstarter will fit, does anyone know if this is true? BTW I have an '01 SE250 and the screw is on top, but the YZ screw is on the side!
Reply With Quote
  #5  
Old 12-18-2009, 05:46 AM
stainlesscycle's Avatar
stainlesscycle stainlesscycle is offline
Site Sponsor
 
Join Date: Jun 2009
Location: morgantown, wv
Posts: 1,608
Default

what is an se250?
Reply With Quote
  #6  
Old 12-18-2009, 06:08 AM
jerseytrailrider jerseytrailrider is offline
Member
 
Join Date: Oct 2008
Location: Ringwood, NJ
Posts: 8
Default

Back in 2001 they offered The special edition, I believe it's the same thing as the Dealer edition!
Reply With Quote
  #7  
Old 12-18-2009, 07:15 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

Quote:
Originally Posted by jerseytrailrider View Post
Did you like the YZ kickstarter better than the stock one. I also heard a KTM kickstarter will fit, does anyone know if this is true? BTW I have an '01 SE250 and the screw is on top, but the YZ screw is on the side!
I have never heard the KTM thing, I don't think it will work. Here is a link to a lever on eBay with a good picture.
http://cgi.ebay.com/ebaymotors/Yamah...61810003r23429
This lever will fit both my '00 and '04 so I'm unsure what you are talking about on yours. The 200 is the same I believe.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #8  
Old 12-18-2009, 07:29 AM
jerseytrailrider jerseytrailrider is offline
Member
 
Join Date: Oct 2008
Location: Ringwood, NJ
Posts: 8
Default

Thanks for the reply! Everyone seems to be using the same kickstarter, and that price is the cheapest I've seen! Thanks again!
Reply With Quote
  #9  
Old 12-18-2009, 08:51 AM
webmaster's Avatar
webmaster webmaster is offline
Administrator
 
Join Date: Jul 2006
Location: Portland, Oregon, U.S.A.
Posts: 1,687
Default

Quote:
Originally Posted by jerseytrailrider View Post
Back in 2001 they offered The special edition, I believe it's the same thing as the Dealer edition!
The dealer edition was the same as the "base model" XC of that year. The SE was loaded up with options - it had ohlins forks, gold anodized rims, and special graphics, (wer damper?) etc. You could not get the 'ohlins forks option' by itself - you had to order the SE.

jeff
Reply With Quote
  #10  
Old 12-18-2009, 03:14 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

The KTM starter will work, I had one on my '00 XC250. Since the knuckle is more narrow, you have to add some shims to the shaft so it can seat on the taper before the bolt bottoms.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kick Start 07 FSR 450? GavGav Enduro Engine 4 stroke (including EFI & Exhaust) 18 04-08-2011 04:33 AM
450 kick start gibbo450 Enduro Engine 4 stroke (including EFI & Exhaust) 22 12-23-2007 05:57 PM
gas gas 300 kick start. kingding1976 General Discussions & Announcements 5 11-12-2007 10:11 PM




All times are GMT -5. The time now is 01:45 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org