|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Wheel Sets To Fit GasGas?
I am trying to find out which wheelsets (if any) from other manufacturers will fit a GasGas. Specifically a 2007 EC300.
I really dont want to have to mess around with anything more than modifications to the wheel spacers. Thanks, Matthew
__________________
Believe nothing, no matter where you read it or who has said it, not even if I have said it, unless it agrees with your own reason and your own common sense. [Buddha] |
#2
|
||||
|
||||
My friend has a KX wheel on the rear of his 01xc300. I think it only required spacer modification which is also the case when going from a 01 model gasser to an 07 model.
|
#3
|
||||
|
||||
I run a set of 2003 stock GasGas wheels with the U-rims on my 2011. Look for a part out bike and grab the wheels. My wheels are on their 3rd bike and are by far more resilient than the newer excel wheels in my opinion. All you need is the newer seals and bearings and larger diameter spacer for the front wheel.
__________________
2018 EC 300 |
#4
|
||||
|
||||
+1, got a set already for the new scooter.
|
#5
|
|||
|
|||
I wonder if they will fit the new 2012 Haan wheels?
__________________
EC300 2019 (11 Gassers owned, many more to go) |
#6
|
||||
|
||||
I would be willing to bet that the 2012's are still using the same swing arm, forks, clamps and axles that they used on the 2011's. If so, they would most certainly fit.
__________________
2018 EC 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear wheel nut | Rabbitist | Enduro Chassis & Body | 4 | 07-04-2011 03:35 PM |
Wheel/Wheel Bearing? | cbutler | Enduro Chassis & Body | 4 | 04-17-2011 09:55 PM |
Wheel X-over | loganlexow | Enduro Chassis & Body | 9 | 02-04-2008 01:03 PM |