|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Fantic
ok does gasgas provide motors to fantic? i found this link over on ktmtalk, and it looks waaaay to similar.
http://www.moto.it/news/le-fantic-motor-2011.html the engine and gas tank and some of the controls all look very very similar, as does their estart.
__________________
03 ec250 hyde skidplate, cycra handguads, protaper contours "what? it seemed like a good idea at the time!" |
#2
|
|||
|
|||
"125, 250 and 300 two-stroke.....
This is demonstrated by the three beautiful bike made by the staff of Fregnan and strictly powered engines with Gas Gas (revised accordingly in the exhaust and carburetion) to 2 times. " from ur own link |
#3
|
||||
|
||||
Cool looking bikes.
__________________
2005 YZ 250F |
#4
|
||||
|
||||
very nice, price?
__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic. Now a 250cc. |
#5
|
|||
|
|||
HAha, too funny. With GG engines I'll stick with GasGas! I had a Fantic trials bike at one time. Right side FORWARD kick to start. Remember to always turn the handlebars to the left before kicking or you will recieve a lesson to your knee if it backfires!
I think mine was a '89 model 301. It was a good bike.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#6
|
|||
|
|||
Looks like they supply alot more than engines. Swingarm, rear fender/side panels and airbox, and the radiator shrouds look trick and i think the bolt pattern looks the same as my 07 ec300. Anybody know where to get the shrouds?
|
#7
|
||||
|
||||
Quote:
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com Last edited by stainlesscycle; 10-27-2010 at 06:27 AM. |
#8
|
||||
|
||||
missed that. i had a heck of a time reading the translated version.
__________________
03 ec250 hyde skidplate, cycra handguads, protaper contours "what? it seemed like a good idea at the time!" |
#9
|
|||
|
|||
Missed this thread,, the pic thread on the fantic bike does look nice and if they make it here and end up selling low due to lack of sales might be a good back up GG..
__________________
Steve 16 Beta 350rr 04 KTM 525 sx/exc gone 03 KTM 625 sxc-rehab unit-did its job and now gone 03 GG 250 ec-gone 97 GG 250 ec Gone |
|
|