Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-01-2023, 12:32 AM
Pandelis Pandelis is offline
Member
 
Join Date: Mar 2023
Posts: 3
Exclamation Rieju MR300 piston end gap specs?

Hello

Anyone knows what is the actual piston end gap min and max spec? Could not find the Rieju workshop manual anywhere.

Gas gas manual states 0.5mm to 0.8mm
My old original S3 piston was 0.4mm
The new S3 piston that I am about to replace is 0.25mm

Nothing matches!

What do I do??

Thanks


Reply With Quote


  #2  
Old 08-01-2023, 01:49 AM
SS109's Avatar
SS109 SS109 is offline
Senior Member
 
Join Date: Jan 2011
Location: Tucson, AZ
Posts: 982
Default

Quote:
Originally Posted by Pandelis View Post
What do I do??
Always follow the piston manufacturers specifications. See, different companies can use pistons/rings made of different alloys from one another hence leading to different specs for their particular piston and ring setups. Again, follow the instructions that are specific to the piston you're using.
__________________
WildAzzRacing YouTube channel
Trail Riders of Southern AZ club
AZ State Parks OHV Ambassador
'11 EC250R
'98 KDX220
Reply With Quote
  #3  
Old 08-01-2023, 02:10 PM
Pandelis Pandelis is offline
Member
 
Join Date: Mar 2023
Posts: 3
Default

Thanks, that's good to know.. But for next time!
I was in a bit of a hurry so I decided to file it down to 0.4mm same as the original piston i removed since it was the same brand (S3).

Unfortunately S3 didn't specify any specs or any range of gap clearances, which I think they should.

I assume that I am still within spec.


.
Reply With Quote
  #4  
Old 08-02-2023, 07:39 AM
Noobi06 Noobi06 is offline
Senior Member
 
Join Date: Sep 2022
Posts: 188
Default

A good ring gap is usually 0.005"-0.007" per inch of bore.
Meaning if your bore is 72mm (2.83inches), you want to be inbetween
2.83 x 0.005: 0.014 inches: 0.35mm
2.83 x 0.007: 0.02inches: 0.51mm
You want to be inbetween 0.35mm - 0.51mm
Reply With Quote
  #5  
Old 08-02-2023, 02:19 PM
Pandelis Pandelis is offline
Member
 
Join Date: Mar 2023
Posts: 3
Default

Thank you, it nice of you to share this information. I will keep this notes for the future!
Reply With Quote
Reply

Tags
end gap, piston gap, ring, specs



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
rieju mr300 vs 17 ktm, are the counter balance engines worth the extra money abraham General Discussions & Announcements 5 03-29-2022 06:48 PM
Rieju MR300 reviews? SS109 General Discussions & Announcements 1 12-25-2020 11:16 AM
Rieju MR300 mitinsky General Discussions & Announcements 4 11-02-2020 10:30 AM
Gas gas ec450fse 2004 piston ring and piston pin for sale Laszlo ervin Parts 0 12-12-2019 09:26 AM
2014 250 Piston Specs? Blakelpd5 Enduro Engine - 2 stroke 0 05-06-2015 03:02 AM




All times are GMT -5. The time now is 11:10 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org