Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-04-2018, 10:00 AM
kdxkid kdxkid is offline
Member
 
Join Date: Mar 2014
Posts: 59
Default 2011 EC300 idle adjustment & more

Hello,

I have a new to me 2011 EC300 - with about under 10 hours on it (bought it used with 6 hours and have 1 ride on it so far).

I haven't touched anything on it, and it seems to be jetted pretty good (ableit I have no other bike to compare it to). Here are a few items I am looking for suggestions on:

1. Idle is too low. The bike seemed a little too easy to stall (slow stuff, when releasing clutch) and also when stopped on the trail (unless I was keeping on the throttle). Hoping this is as simple as an AS or idle adjustment, however see #2 and #3 below.

2. A good bit of black spoog out of the silencer at the end of the day.

3. Power characteristics - I think this is good, although I think I was expecting more snappy power down low?? Up top it definitely pulls hard and feels responsive, however if I am just chugging along not really on the pipe, and wack the throttle open (2nd or 3rd) I was expecting the front to come up a little easier.

If anyone has / had this bike feel free to chime in. I want to know if this is all common - if not I will check the carb for what jets, float height, etc.

Thanks!
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
'06 EC300 fork damping adjustment brider General Discussions & Announcements 3 09-29-2012 03:37 AM
Idle adjustment help FSR 450 chuck Enduro Engine 4 stroke (including EFI & Exhaust) 1 06-10-2012 10:11 AM
2011 EStart EC300 Gasket Adjustment Kit Moto7man General Discussions & Announcements 4 04-30-2012 11:23 AM
Idle adjustment doesn't work JCW Enduro Intake/Carburetion - 2 stroke 12 07-24-2008 07:59 PM
idle speed adjustment Qui-gon Enduro Engine 4 stroke (including EFI & Exhaust) 5 04-07-2008 06:07 PM




All times are GMT -5. The time now is 05:38 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org