|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Gear ratio ec 300 2010
After 3 years of ktm I'm back on GG. Before ktm I have owned 2009 300 ktm,200,250 2014. So my question is,the tranny ratio on gg is shorter than ktm? 13-50 on gg seams 13-53 on ktm.
|
#2
|
||||
|
||||
Just run what works for you. I run 13/48 on my 2011 EC250 which has the same transmission ratios as yours.
__________________
WildAzzRacing YouTube channel Trail Riders of Southern AZ club AZ State Parks OHV Ambassador '11 EC250R '98 KDX220 |
#3
|
|||
|
|||
yes, 13-50 on my 2018 XC300 has the same feeling at the seat of the bike as 13-52 on my 2018 Husky 300
|
#4
|
||||
|
||||
I am in co 7-9000 '250 13/51 300 13/49 but motors are ported
|
#5
|
|||
|
|||
I can lug the bike well on 1st and 2nd but the clutch will squeals like hell.
By the way,after 9 years (from when my model is born and the problems with the clutch are old) what is the solution? I mean ,what can I do to reduce the noise without change OEM clutch basket.l? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What oil and what ratio ec 300 | eviljim | Enduro Engine - 2 stroke | 5 | 07-10-2012 01:03 PM |
Compression ratio ? | Brian VT | Enduro Engine - 2 stroke | 10 | 02-03-2011 10:47 PM |
gear ratio breakdown?? | Cruiser | General Discussions & Announcements | 3 | 04-06-2009 08:53 PM |
what ratio to premix at? | j@y | Enduro Engine - 2 stroke | 16 | 05-18-2007 09:53 AM |
Pre-Mix ratio | gasIdaho | Enduro Intake/Carburetion - 2 stroke | 8 | 03-21-2007 11:17 AM |