|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
06 Rebuild question
So here's the 06 300 I picked up locally. It needed a 4th gear so while I was in there I did new crank bearings, seals, etc. anyway, I have it back together other than the piston. That hasn't shown up yet.
I have a quick question. It has a smaller stator in it, and when I pulled the bike apart, it only had 1 screw in it and it was backed nearly all the way out. So I have no idea where the timing was set, and there are no marks on the case to line it up with. Anyone know how to set the timing? Here's the stator.
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
#2
|
|||
|
|||
Check this topic:
http://www.gasgasrider.org/forum/sho...gnition+timing
__________________
2011 EC250E |
#3
|
|||
|
|||
Ah. I'm sorry. I thought I had searched but obviously I hadn't. Thanks for the link! Mine was missing the timing bolt. All better now!!
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rebuild Kit | joe gas gas | Enduro Suspension | 0 | 12-20-2015 03:46 PM |
Top end rebuild...Piston question | 95jersey | Enduro Engine - 2 stroke | 6 | 06-05-2015 12:23 AM |
Gt32 327cc rebuild question (splitting case) | Cisco | Enduro Engine - 2 stroke | 5 | 05-02-2015 06:40 PM |
Top end rebuild | forgiven | Enduro Engine - 2 stroke | 9 | 12-05-2013 11:01 AM |
Can I do a rebuild myself? | stix49 | Enduro Suspension | 5 | 09-06-2012 12:39 PM |