wheel bearings

[swazi_matt]

Can anyone tell me what the rear wheel bearing seals are. Can find the codes for front seals and bearings and rear bearings, but not rear seals.

googled and it seems like 25x42x7 and 32x47x7 anyone able to confirm these?

Want to go to the local bearing supplier and get a spare set - any recommendations on what type to get?

should i rather go with pivot works or all balls kit? (they only list 2008 gg on PW site, has it changed, see they also have 3 seals on the rear?? http://www.pivotworks.com/ProductInfo.aspx?item_id=4532)

thanks

[Jakobi]

I'll have a look at the boxes I have downstairs from when I did mine. I actually might even have the old bearings still sitting on the bench.

[swazi_matt]

thanks Jake

[Fred1956]

Originally Posted by swazi_matt

Can anyone tell me what the rear wheel bearing seals are. Can find the codes for front seals and bearings and rear bearings, but not rear seals.

googled and it seems like 25x42x7 and 32x47x7 anyone able to confirm these?

Want to go to the local bearing supplier and get a spare set - any recommendations on what type to get?

should i rather go with pivot works or all balls kit? (they only list 2008 gg on PW site, has it changed, see they also have 3 seals on the rear?? http://www.pivotworks.com/ProductInfo.aspx?item_id=4532)

thanks

FWIW Pivot Works is now offering a limited lifetime warranty on their bearing kits

[swazi_matt]

spent quite a while on their site and before i knew it there was $250 worth in my cart, luckily i did not click the pay button or i would be divorced .... and riding twice a weekend .... hmmmm ;-)

[Jakobi]

I'll have to do it tonight after work Matt. Hope you're not in a rush.

[Jakobi]

10:15pm and I'm on the mission for you! I still had the old bearings on the bench so can run the verniers over them if you need sizes. Had the boxes from the Nachi's I installed in a zippy bag ready for next time I need to order to. I used 2NSE9 grade

2 x 6004
1 x 6005

Just googled some more
6004 = 20x42x12
6005 = 25x47x12

Thats on my 2010 model with AJP hubs. I assume yours would be the same.

[bchatt]

I think swazi was after the rear seal numbers.
They are 32x47x7 ( #32428) and 25x42x7 (#25466).

[Jakobi]

Oops. Didn't read properly. Thanks Barry! I'll write that down in my consumable parts list!

[Stevel]

Hi there im lookin to replace my 2011 bearings and also buy some spare wheels, can anyone confirm bearing codes eg 6004 and what year wheels fit
Thanks in advance