Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-26-2020, 10:18 AM
Andy_uk127 Andy_uk127 is offline
Member
 
Join Date: Dec 2020
Posts: 2
Default Rear brake calliper rebuild

I have a 1999 gas gas ec300

While out riding today the calliper bolt has come out I am looking for a rebuild kit as the rubber has come out too.

My question is this is there other bikes that use the same setup as I can?t find it for my bike or does anyone know where I could get new bolts and rubbers

Thanks in advance


Reply With Quote


  #2  
Old 12-26-2020, 11:10 AM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default

I used one from Yamaha YZF



Send from iPhone with Tapatalk
The Phownix Must burn to emerge
__________________
4 strokes are only good for power generators
Reply With Quote
  #3  
Old 12-26-2020, 11:15 AM
Andy_uk127 Andy_uk127 is offline
Member
 
Join Date: Dec 2020
Posts: 2
Default

Do you know what year and engine size?
Reply With Quote
  #4  
Old 12-26-2020, 12:20 PM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default

Sorry, I don’t remember, but it was an older version, before 2015 or so. I think if was 250F



Send from iPhone with Tapatalk
The Phownix Must burn to emerge
__________________
4 strokes are only good for power generators
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear brake calliper crossover? motopsycho87 Enduro Chassis & Body 3 05-16-2016 09:27 AM
2011 rear master cylinder brake rebuild BrentMartell Enduro Chassis & Body 3 06-09-2014 09:52 AM
Sanity check, '06 EC300 rear brake MC rebuild kit? brider Enduro Chassis & Body 2 03-24-2014 08:17 AM
rear brake master cylinder rebuild kit ?? 2006 Fred1956 Enduro Chassis & Body 1 03-28-2012 02:31 PM
Nissin Rear Brake rebuild kit? Berkyboy General Discussions & Announcements 4 09-13-2007 06:41 AM




All times are GMT -5. The time now is 09:23 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org