GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Reviews

Enduro Product Reviews Feedback & Comments on Products Tested


Reply
 
Thread Tools Display Modes
  #1  
Old 05-23-2016, 08:10 AM
Zrt1200 Zrt1200 is offline
Senior Member
 
Join Date: Mar 2016
Location: Mid Michigan
Posts: 178
Default Tusk Chub Bars (Fat Bars)

When I bought my 05 GG I could tell the bars were bent slightly and they were a little short for my liking so I decided it was time for a new set. When I went looking for bars I did a search for different bar bends and came across Tusk Chub bars. These bars are 1/2 the cost of every one else's and are made out of 7075 Aluminum. Being a machinist by trade I know 7075 is the best grade of aluminum money can buy and after reading 20 or so reviews I decided to try a set. I ended up buying two sets just to try different bends. I bought a set of RC High bars and CR High. After a couple laps around my yard I soon realized I like the CR High and the RC highs are to tall for me being 5ft 9". If I was over 6ft the RC highs might work.

I have approx 10-12 hours of riding on these bars as of now and I can say with out a doubt I will be buying another pair when the time comes. I have not crashed on the bars but I have put these bars through all other test and they come out with flying colors. All the control's and hand guards bolted right up with no problem's. These bars do not come with a bar pad but for 1/2 the cost of the others you can buy a bar pad as I did.

https://www.rockymountainatvmc.com/p...1-8%22-Big-Bar

Handle bar Bends Master Chart...

https://docs.google.com/spreadsheets...=2&pli=1#gid=0

Rocky Mt Bend chart....

https://www.rockymountainatvmc.com/H...r-Measurements
Attached Images
File Type: jpg IMG_20160523_085436850.jpg (127.6 KB, 51 views)
File Type: jpg IMG_20160523_085445211.jpg (122.2 KB, 42 views)
File Type: jpg IMG_20160523_085503851.jpg (125.9 KB, 57 views)
File Type: jpg IMG_20160523_085543947_HDR.jpg (129.8 KB, 57 views)
File Type: jpg IMG_20160523_085605312.jpg (123.9 KB, 57 views)


Reply With Quote


  #2  
Old 05-23-2016, 08:34 AM
fst96se fst96se is offline
Senior Member
 
Join Date: Apr 2014
Posts: 199
Default

I have the same bars on my 13. They are great.
Reply With Quote
  #3  
Old 05-23-2016, 05:41 PM
Zrt1200 Zrt1200 is offline
Senior Member
 
Join Date: Mar 2016
Location: Mid Michigan
Posts: 178
Default

I should add I used my hand guards several times over the weekend just skimming tree's and the bars held up great.
Reply With Quote
  #4  
Old 03-25-2017, 03:17 PM
Zrt1200 Zrt1200 is offline
Senior Member
 
Join Date: Mar 2016
Location: Mid Michigan
Posts: 178
Default

I just wanted to give you a update. The bars are still holding up great after several light crash's in the woods. The EE hand guards bolted right up as well. FYI, Its the same bike I just updated the plastic with the Motocrosscenter special mod kit last fall when I was done riding for the year.
Attached Images
File Type: jpg IMG_20161125_132735895_HDR.jpg (130.6 KB, 17 views)
File Type: jpg IMG_20161126_081730096_HDR.jpg (132.3 KB, 22 views)
Reply With Quote
  #5  
Old 03-26-2017, 12:41 AM
fst96se fst96se is offline
Senior Member
 
Join Date: Apr 2014
Posts: 199
Default

Quote:
Originally Posted by Zrt1200 View Post
I just wanted to give you a update. The bars are still holding up great after several light crash's in the woods. The EE hand guards bolted right up as well. FYI, Its the same bike I just updated the plastic with the Motocrosscenter special mod kit last fall when I was done riding for the year.

I have the same bars. They are great.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bars mgrumke Enduro Chassis & Body 1 04-01-2015 04:23 PM
Bars Dingo Enduro Chassis & Body 8 09-12-2007 09:55 PM
7/8 vs 1-1/8 bars? eff Enduro Chassis & Body 1 02-17-2007 07:30 AM
TUSK Aluminum handle bars MikeB Enduro Product Reviews 4 08-10-2006 07:31 PM




All times are GMT -5. The time now is 05:10 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org