Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-05-2020, 06:47 AM
Siggewiksson Siggewiksson is offline
Member
 
Join Date: Jan 2020
Posts: 5
Default power valve 2006 on 2013 cylinder

has somebody used a the power valve system from 2006 on the 2013.
i bought a athena cylinder for 2013-2015 and thought that it was possible to put in the 2006 powervalve. but now i see that its not possible because it doesnt open all the was and hits the cover when its fully opened.

i thinking of make an spacer so the power valves can go out longer and cut a little where the axis goes so the powervalves is able to open all the way

somebody done this?


Reply With Quote


  #2  
Old 02-05-2020, 07:00 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

No, but you're about to become the expert on this.

Look at parts diagram, you can find despice (part files) for different years.

To work the valve needs to be, at least closeish, to the piston .
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #3  
Old 02-06-2020, 06:56 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

I have ground the old power valve flapper to get rid of the bump and allow for more flow. The old valve flapper and pivot are very similar and I think the same as 1994-1996 Honda CR250.
Attached Images
File Type: jpg cr250 PV.jpg (115.5 KB, 16 views)
Reply With Quote
Reply

Tags
ec 125, ec125, power valve



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
power valve ec 125 2013 eranmu Enduro Engine - 2 stroke 6 04-19-2017 07:08 AM
Power Valve ? BigAl Enduro Engine - 2 stroke 4 01-05-2015 09:08 PM
S3 cylinder/power valve help? '11EC300 Enduro Engine - 2 stroke 7 06-02-2014 08:18 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 09:56 AM
power valve nut bonkeye Enduro Engine - 2 stroke 4 10-11-2012 06:40 PM




All times are GMT -5. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org