Top end power

[(F5)]

That's not entirely responsible. What about the wine industry? They need your support too.

[rodent]

Originally Posted by (F5)

That's not entirely responsible. What about the wine industry. They need your support too.

I suffer gout, no wine for me brother

But I do enjoy a sparkling white

[Nicktamps]

Originally Posted by rodent

Cool, While you're doing that I'll have more beers and pass out

Wonder how many beers it takes a rodent to pass out. Suppose it depends what type. A kapibara would be able to hold a lot more than a field mouse I'm sure

[Nicktamps]

So took the side of the power valve off. Found the actuator arm snapped. Welded her back on temporarily. Will source and order one end of the month. It's very dirty in there. Anyway. Here's a pic of it snapped

[(F5)]

Haha, funny what you find. Great news though. Check movement doesn't drag on anything, I had to adjust mine carefully although they have changed them from my oldie it looks.

[rodent]

Originally Posted by Nicktamps

So took the side of the power valve off. Found the actuator arm snapped. Welded her back on temporarily. Will source and order one end of the month. It's very dirty in there. Anyway. Here's a pic of it snapped

At least you found the source of the problem

Oils cheap, that looks well neglected

[Zman]

I agree that oil sludge looks pretty bad. What brand and type of trans oil and premix are you using?

[Nicktamps]

Originally Posted by Zman

I agree that oil sludge looks pretty bad. What brand and type of trans oil and premix are you using?

I've only had the bike 2 months. It had deffinutly been neglected before hand. I've changed the trans oil 3 times since I've had it. Running motul 10wt40 in there. Any suggestions on the best trans oil for it? I am running Castrol racing 2t 2 stroke oil. Running it at 2%. But again. I don't know what the bikes been Through before me. Should see the state on the electrics 🤣. Lucky I'm a sparky. I'll spend a day on them in the summer and get it sorted. Just Gona take it back to basics with it as it's a mess 🤣I'll get the top end done on it soon to

[(F5)]

I run Motul Transoil Expert , if I run normal Transoil the clutch drags.

Read the jetting thread. Main improvement is anything other than the std needle.

[Nicktamps]

Originally Posted by (F5)

I run Motul Transoil Expert , if I run normal Transoil the clutch drags.

Read the jetting thread. Main improvement is anything other than the std needle.

Yeah I will have to try and get my head around that. There is plenty of power there for me at the moment tho. I get some clutch howl I've noticed. When struggling like. What can I do to reduce that?