Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.

Thread Tools Display Modes
Old 10-09-2014, 07:50 AM
Watty Watty is offline
Join Date: Mar 2014
Location: uk
Posts: 26
Default 2012 starter gear how much !!!!!

Wow my starter sprocket that sits on the flywheel decided to break last weekend , quick call to gas gas uk and they are trying to relieve me of nearly ?200 just for the sprocket are they mad , does anyone know if there are any cross over parts from another bike that i can buy or am i just kicking it from now on ??

No company can justify charging that for a gear cog its about 50p worth of metal

Reply With Quote

Old 10-13-2014, 02:30 PM
earlystock earlystock is offline
Join Date: Apr 2014
Location: Odessa Wa, USA
Posts: 35

I haven't had this problem yet knock on wood, but maybe check with a machinist shop, probably cost a fair amount depending on the shop and equipment they use, but I doubt it would be $200 in my experience. I had some yamaha hubs turned to accept bearings for my old ktm 620 and I think I only paid $50 for both hubs, but I am also a farmer so they see me more often then I care to admit lol.
Reply With Quote
Old 10-13-2014, 03:41 PM
Boom Boom Boom Boom is offline
Senior Member
Join Date: Mar 2008
Location: Carlisle Pa
Posts: 176

Do a search for posts by BobT on here.
His 2011 failed and he found other parts that worked for much less and done a post about it here.
2014 Sherco SEF 300-R
2014 Sherco ST 300
2013 Sherco X-ride
Reply With Quote
Old 10-14-2014, 05:54 PM
stuart stuart is offline
Join Date: Mar 2014
Posts: 51

this bit ?

Reply With Quote
Old 11-22-2014, 02:43 PM
krolik_21 krolik_21 is offline
Join Date: Oct 2014
Posts: 8

Hi. Look heere total modification cost for all about 100
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2012 Scorpion gear and Homemade PFP adjuster wence Enduro Other... 13 06-22-2012 09:49 AM
2012 XC gear ratios ggalex General Discussions & Announcements 3 03-08-2012 10:05 PM
New Cylinder for 2012 - how will the starter attach? Keg General Discussions & Announcements 6 10-23-2011 12:15 AM
Starter clutch / gear problem iancp5 Enduro Engine 4 stroke (including EFI & Exhaust) 12 01-28-2011 03:45 PM

All times are GMT -5. The time now is 08:52 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org