Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-17-2008, 05:57 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default TrailTech speedo -- brake caliper whole outside the arc

I finally got 'round to installing my Trail Tech Endurance with the cool home-fabricated mount above the tank bolt.

As I screwed the pick-up into the Nissin brake caliper unit, I couldn't help but notice that the pick-up hole would place the cable a good 1.25-inches outside the arc of the magna-bolt on the brake rotor.

Result, an otherwise functioning Trail Tech Endurance doesn't record speed.



Any quick fixes? The former owner said he fabbed a bracket. I gotta be missin' sumthin here.
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trailtech rec/reg wence Enduro Electrical & Wiring 15 02-04-2010 08:50 AM
Rear Brake Caliper blitz11 Enduro Chassis & Body 11 10-28-2008 04:38 PM




All times are GMT -5. The time now is 07:40 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org