Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-07-2012, 04:33 PM
singletracker singletracker is offline
Senior Member
 
Join Date: Nov 2011
Location: Illinois
Posts: 428
Default Rear Wheel Axle

I have a heck of a time getting the rear wheel axle out. It's like it is wedged in there, and it takes a lot more force to get it out than it should. I've resorted to a long punch and hammer, and I've pried it out little at a time with claw hammer until it is about 4 inches or so out then it pulls out easily.

The best thing is probably the long punch and hammer, but I'm worried about messing up the end of the axle. It's been like this since new.

Is there a trick that I'm missing?

2011 250 Race
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
rear axle Q nokturnal Enduro Chassis & Body 4 06-13-2012 11:52 PM
txt 250 1999 rear axle Rabbitist General Discussions & Announcements 0 03-15-2012 04:27 PM
450 wild rear axle bearings dogsbody Other GasGas Bikes/Quads 1 07-16-2009 11:03 AM
rear axle nut skid jackson Enduro Chassis & Body 2 06-17-2007 07:52 PM
Front Axle/Wheel Removal gasIdaho Enduro Chassis & Body 1 02-15-2007 09:31 PM




All times are GMT -5. The time now is 05:35 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org