Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-22-2010, 11:58 AM
Klausen Klausen is offline
Senior Member
 
Join Date: Nov 2009
Location: Germany
Posts: 136
Default REAR CALIPER SUPPORT clearance

Today I notice on my used Gasser that the rear caliper support has to much clearance at the bolt on the swingarm.
Is this normal for 50h old machine?
What can I do.
Repair with HTS-2000 or welding?


__________________
Husqvarna TE 300
Reply With Quote


  #2  
Old 10-22-2010, 03:10 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,589
Default

It should be OK. When you tighten the axle, there should be no movement any way.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
rear caliper replacement wardy Enduro Chassis & Body 2 08-30-2010 08:07 PM
Rear Brake Caliper blitz11 Enduro Chassis & Body 11 10-28-2008 04:38 PM
Broken - Aluminum rear fender support Wellsy Enduro Chassis & Body 6 07-28-2007 11:38 PM
Exhaust Clearance at rear pipe mount REVERUP Enduro Engine - 2 stroke 12 01-15-2007 06:43 PM




All times are GMT -5. The time now is 09:16 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org