Swing arm help

[Fitzynkaz]

Hi,
New to the forum after recently buying a 2017 ec250 racing
I need to replace the swing arm bearings /bushings and cannot for the life of me find the 2017 ones
Some people have said they diddnt change from 2011 to 2019 but I'd rather know for sure off someone who has replaced them on a 2017

All balls list all years except 16 and 17 from what I can find

Can anyone advise

Many thanks alex

[gasgasman]

2018 on up are different.
Stay away from All Balls. Cheap Chinese junk.

I've had good luck with Factory Links.

https://www.cpd-usa.com/shop/sak-g-0...ing#attr=18024

[Anders]

Originally Posted by Fitzynkaz

Hi,
New to the forum after recently buying a 2017 ec250 racing
I need to replace the swing arm bearings /bushings and cannot for the life of me find the 2017 ones
Some people have said they diddnt change from 2011 to 2019 but I'd rather know for sure off someone who has replaced them on a 2017

All balls list all years except 16 and 17 from what I can find

Can anyone advise

Many thanks alex

I don't know about the 11, but I know that the 06 and 15 link bushings are different. I think also the swingarm bushings differ. The 18 and 19 is something else, I presume, as the complete chassis is different.

The 17 chassis is the same as the 15. I recently bought the swingarm and link bushings for my 15 from the Norwegian importer who got them from Spain (Rieju, I presume).

I All Balls lists 14 and 15, they should also fit 17. I'm pretty sure about that, as the 17 is only a 15 with slightly different decals.

The bearings can be found in any good bearing supply, they are HK2216 and DL 2216

[Fitzynkaz]

Thanks everyone I will look into it

[Fitzynkaz]

I have attached a pic of said bike the logbook says ots a 2017 but may be registered late ? Really not sure...but was bought as a 2017

[farmerj]

Good looking bike. While not the answer to your original question - I'm with gasgasman. I've found Factory Links to be of good quality and excellent customer service. I would recommend!

Jeff

[cbutler]

Originally Posted by farmerj

Good looking bike. While not the answer to your original question - I'm with gasgasman. I've found Factory Links to be of good quality and excellent customer service. I would recommend!

Jeff

Top notch been buying from them for years

[Anders]

That is an 18 model as far as I can see

Sent fra min YAL-L21 via Tapatalk