|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Carb boot
I noticed the rubber boot between the reed block and carb is cracked and sucking air. I have the 38mm round top carb. Is there a cross reference that anyone knows of? I used the search but didn't come acrossed anything. Looks similar to my wr boot. Thanks
|
#2
|
||||
|
||||
Just call Boysen. They have them in stock and they are about $10.
|
#3
|
|||
|
|||
Or go to Autozone, get the correct diameter radiator hose, and cut it to length. They work fine.
|
#4
|
|||
|
|||
Thanks guys. Will give both a try. Dave
|
#5
|
||||
|
||||
The factory ones have molded in portions that mate with the recesses in the carb and reed cage spigots.
|
#6
|
|||
|
|||
I know. I think I'm going to call boysen tomorrow. Ask for gasgas carb boot?
|
#7
|
||||
|
||||
yes and you can also read the model number off the reed cage.
|
#8
|
|||
|
|||
I'll have to check I think I have moto tassinari vforce reeds. Thanks for all the info.
|
#9
|
|||
|
|||
Just as a follow up. Boysen has the boot. Part number rb-1, 7.99. They also have it with new clamps rbk-1, 19.99. Fits my 38mm pwk keihin perfect. Thanks again for all the help. Dave
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carb Intake Boot - Help/Advice | StuJohnson | Enduro Intake/Carburetion - 2 stroke | 8 | 07-03-2014 11:07 PM |
Vintage Yamaha reed/carb boot repair | nknudsen | All Other Bikes... | 2 | 05-07-2014 02:30 PM |
Boysen and V-force carb boot ? | joey11 | Enduro Intake/Carburetion - 2 stroke | 2 | 10-20-2008 11:40 AM |
07/08 air boot and box | REVERUP | Enduro Intake/Carburetion - 2 stroke | 7 | 04-29-2008 01:42 AM |
Big Boot | Loosenut | Ride Reports | 0 | 06-26-2007 06:14 PM |