Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-29-2015, 08:06 AM
Terrence R Terrence R is offline
Senior Member
 
Join Date: May 2015
Location: Canada ehh
Posts: 134
Default Other wheels for 2010 ec300r.

Looking for another set of wheels for my 2012 EC300r. Any options? Just trying to find a used set to utilize different tires and different gearing. Any help is greatly appreciated. Thanx.


Reply With Quote


  #2  
Old 06-02-2015, 03:17 PM
roostafish's Avatar
roostafish roostafish is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Eugene Oregon
Posts: 1,245
Default

Any Gas Gas wheels will work, but the wheel bearings changed arty some point. It's alright though, because the outside diameter remains the same, and you can just put the 2010 bearings in the old wheels. I had a set of 2001 wheels on my 2008. Had to swap the bearings. I liked the rounded wheel.
__________________
Mike Sheetz
OMRA #21AA
What will I be riding next? Christini GG 300?
'15 KTM 300 XC-W
'08 EC 250 (Gone to new happy owner)
Gran Prix Cycle
LTR Suspension
RB-Designs
Reply With Quote
  #3  
Old 06-02-2015, 03:41 PM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

My 97' front wheel would not accept the newer bearing to work on anything with the newer Marzocchi forks. The hub was to small to the bearing in.
Reply With Quote
  #4  
Old 11-13-2017, 01:47 PM
honuki250 honuki250 is offline
Member
 
Join Date: Nov 2008
Location: Ohio
Posts: 98
Default

When I put the wheel bearings in the front I had a large distance from the edge down to the bearing. So when I put the seals on with the spacer the seal was 1/2 inch away from the bearing. Its that ok to do this?
Reply With Quote
  #5  
Old 11-13-2017, 04:01 PM
nhgas's Avatar
nhgas nhgas is offline
Silver Level Site Supporter
 
Join Date: Jun 2011
Location: New Hampshire
Posts: 46
Default

This set in Amesbury MA has been on Craigslist for a while... not mine!

https://boston.craigslist.org/gbs/mp...380745641.html
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trade my spare GG wheels for KTM Wheels Ed Ventura Parts 5 01-03-2015 06:54 PM
new ride EC300R RonRonNJ General Discussions & Announcements 9 08-07-2014 07:10 PM
compatible wheels for 2010 EC300? GGCanuck Enduro Chassis & Body 2 11-29-2011 09:59 PM
3.1 Gallon Fuel Tank - EC300R 2010 - Any know of one? Keg Enduro Chassis & Body 1 09-26-2009 06:18 AM




All times are GMT -5. The time now is 03:47 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org