|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Other wheels for 2010 ec300r.
Looking for another set of wheels for my 2012 EC300r. Any options? Just trying to find a used set to utilize different tires and different gearing. Any help is greatly appreciated. Thanx.
|
#2
|
||||
|
||||
Any Gas Gas wheels will work, but the wheel bearings changed arty some point. It's alright though, because the outside diameter remains the same, and you can just put the 2010 bearings in the old wheels. I had a set of 2001 wheels on my 2008. Had to swap the bearings. I liked the rounded wheel.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#3
|
|||
|
|||
My 97' front wheel would not accept the newer bearing to work on anything with the newer Marzocchi forks. The hub was to small to the bearing in.
|
#4
|
|||
|
|||
When I put the wheel bearings in the front I had a large distance from the edge down to the bearing. So when I put the seals on with the spacer the seal was 1/2 inch away from the bearing. Its that ok to do this?
|
#5
|
||||
|
||||
This set in Amesbury MA has been on Craigslist for a while... not mine!
https://boston.craigslist.org/gbs/mp...380745641.html |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Trade my spare GG wheels for KTM Wheels | Ed Ventura | Parts | 5 | 01-03-2015 06:54 PM |
new ride EC300R | RonRonNJ | General Discussions & Announcements | 9 | 08-07-2014 07:10 PM |
compatible wheels for 2010 EC300? | GGCanuck | Enduro Chassis & Body | 2 | 11-29-2011 09:59 PM |
3.1 Gallon Fuel Tank - EC300R 2010 - Any know of one? | Keg | Enduro Chassis & Body | 1 | 09-26-2009 06:18 AM |