|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Anyone tried a 14t front sprocket in an EC300?
I have been doing abit of thinking in regards to the gearing on my Gasgas. Currently it has the 13/48 combo on it. At 70km/h, transfer sections and sand riding it feels abit high in the rpm range. For the sake of an easy test, I could throw a 14t front on and see the difference.
Anyone running a similar combo, or is this just a torque killer? 2018 ec300 |
#2
|
||||
|
||||
http://www.gasgasrider.org/forum/sho...95&postcount=2
To clear the chain slider, I had to remove the swingarm axle and pull back the swingarm to install the gear. Then put back the swingarm and axle. Sure help with the road speed after I changed the rear to a 42T. |
#3
|
|||
|
|||
Ah great tip there. Definitely going to throw a 14t in the next order
|
#4
|
||||
|
||||
I think a 14 may not fit on some of the older GG bikes.
|
#5
|
||||
|
||||
The link I posted is a 14T on my 1998 EC250. So it worked on mine.
Never felt the need to try one on my 2002 EC300. On the trails it is plenty fast for my fat butt. Cheers |
#6
|
||||
|
||||
I tried to put one on my 2000 XC300 and I did not want to grind on the swingarm to make it fit.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front Sprocket | yowie05 | Enduro Chassis & Body | 5 | 04-01-2019 10:25 AM |
Front Sprocket | Russhole | General Discussions & Announcements | 2 | 09-29-2018 09:35 AM |
Front sprocket / EC300, 2009 | Mikeyx | Enduro Chassis & Body | 3 | 07-22-2017 03:59 AM |
ec300 06 front sprocket loose on countershaft splines | hillbilly | Enduro Engine - 2 stroke | 9 | 12-24-2012 08:29 AM |
Front sprocket? | wence | Enduro Chassis & Body | 8 | 09-18-2010 02:12 AM |