Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-10-2008, 08:14 AM
nhrider's Avatar
nhrider nhrider is offline
Silver Level Site Supporter
 
Join Date: Sep 2006
Location: Concord, NH
Posts: 496
Default bike hot or not?

2005 EC200 with Flatland guards, LTR impeller. One rad was tweaked a little before the brace but not bad.

I'm dual-sporting the bike to the trails and noticed more coolant in the overflow bottle. I don't see any coolant on the ground. The motor seems to be at normal operating temps. I can touch the motor so it can't be that hot. Doesn't smell hot. I do ride one gear higher to keep the noise down. I replace the water pump seal last year and added coolant.

Maybe I need to get that water pump spinning more. Maybe I added to much coolant. Maybe the thermostat is bad. I'm not sure on the carb settings...so don't ask.

Should I be worried?
__________________
2005 YZ 250F
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Getting trials bike clutch feel on an enduro bike? SpeedyManiac Enduro Chassis & Body 3 12-01-2010 02:11 PM
Lugging the bike and stalling - jetting, technique, wrong bike? stay_upright Riding Techniques & Training 21 04-18-2009 05:23 AM




All times are GMT -5. The time now is 05:51 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org