2018 Starter Fix Thread - Continued.

[SS109]

Originally Posted by Booki

Least the first 4 items seem straight forward.
How do you remap the CDI? Are dealers the only one who can do it?

Dealer has to do it. Contact your local dealer and see if your bike's CDI has been updated.

Originally Posted by Wypipo

Are there any trouble shooting methods to determine if it?s the starter itself? I have done the first 4 and have good voltage everywhere

You can pull the starter and bench test it. It should run smoothly with no unusual noises and no slop on the bearing the shaft rides on. If you're going that far, check that the bearings that support the bendix and the starter spin easily and smoothly.

In my opinion, from all that I have read, I believe the CDI, the starter mechanism bearings, and the starter are the cause of the actual no start problems.