|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Zoke 48's?
Just wondering if anyone has tried them and what they thought of them?
I am looking at buying a 12 and we are getting the ohlins rear(888 I think) , with 48 zokes . Thanks in advance, Mark P.s 07 for sale if anyone is interested.... |
#2
|
||||
|
||||
Should have done a search first I guess as there is already a thread on this.
After reading the thread I am assuming they are very firm but do not transfer hits to the hands. Any one want to enlighten me any further? Do they have a lot of static sag or sit high in the stroke, what clicker settings are people running and what terrain are they riding? Cheers Mark |
#3
|
||||
|
||||
I'd love to hear more info on this too!
|
#4
|
||||
|
||||
I spoke to Les after he finished revalving a set. Well made fork, good coatings. Seals are a bit sticky with high drag. No exotic tools needed to service. Similar (but not a copy) to a KYB but with the adjustable preload chamber spring. Overall a positive review.
|
#5
|
|||
|
|||
Think the new slick SKF seals and bushings that are used on the 2012 Katooms are available for this new fork?
__________________
2018 XC300 |
#6
|
||||
|
||||
He already had seals that fit and swapped them to make it slick. All was good in the end.
|
#7
|
|||
|
|||
Any reviews out there from someone that has some seat time with the new forks?
2012 250 on order for me. Hope to be riding in Feb.
__________________
2018 XC300 |
#8
|
|||
|
|||
Quote:
takes them about 800-1000km to break in and lose the stiff feel (even before broken in they are not harsh on the hands just stiffer and cause a little armpump) once broke in they are plush but informative on whats going on with the front tire. they are good and very predictable on the harsh stuff (lose rocks, sharp edges in all speeds) i really love them, i had a set of YZ450F KYB forks on my Yamaha WR450F that i sent to factory connection for revalve and the zooks are equal if not better on the sharp ugly stuff, the KYBs beein motocross forks where better in the big jumps as they never bottomed out , the zooks do bottom on big drops (i am 200 pounds w/o gear and stock springs in front). i did ride the nambotin replica and must say the front there is something else, the bike seats higher in the stroke and it feels even plusher and better then the stok zooks. btw Ivan Cervantes says the 2012 will corner even better and still be a stable bike in high speeds. images from a day with a champion, the nicest guy out there: this image Ivan helps me set up the bike ,for a tall rider 1.90cm he recommended me moving the handlebars connectors to the front notch, and what a diff it makes http://albums.phanfare.com/isolated/...geID=141269417 |
#9
|
||||
|
||||
Thanks mate ,
This is the sort of feedback I was after.How do they compare to older zoke 45's? Cheers Mark |
#10
|
|||
|
|||
Quote:
can tell you that i loved the front on the nambotin, the rear TTX didn't feel great and bottom out on fast bumps, but it was on a stock 5.2 spring which is too soft for my weight, i am on 5.8s on my bike. think next year i will be tempted to go with the new 300 2012 Seb GUILLAUME?? |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
45mm Zoke performance | toolmaker | Enduro Suspension | 61 | 04-05-2011 05:30 PM |
50mm zoke rebuild | PEB | Enduro Suspension | 4 | 08-30-2010 07:24 PM |
odd ktm/gg 43/48/zoke suspension quandry | Cruiser | Enduro Suspension | 2 | 11-15-2009 11:43 AM |
45mm zoke shim id | Ed Ventura | Enduro Suspension | 1 | 09-22-2008 05:34 AM |
Recommendations on a zoke tuner? | stvbird | Enduro Suspension | 2 | 02-13-2008 06:40 AM |