How do I change the clocks from KPH to MPH

[KTMAndy]

I know I've read it here somewhere, I've searched for "clocks" and "Speedo" but I'll be damned if I can find it.

So what buttons do I press to make it show miles per hour? At the moment it has that odd |~ symbol thing on the left and reads in kmh, makes me feel like I'm going at warp speed! But no practical use for me lol

[blitz11]

Just divide KPH by 1.6 in your head while you ride. That's what I do.

That also might explain why I'm slow, often crash, and am always at the end.

[KTMAndy]

Hmm, not used to looking at it in the mud lol, but... On the tarmac remembering that 48 is 30 lol, hmm, there's a reset thing somewhere.

[swazi_matt]

If you have the same as what I have, it is a GG branded trailtech computer and they have the operation manual on their website

[KTMAndy]

Sussed it, it's in the workshop manual, unplug the battery, hold down the setup button, plug in the battery, it says "nil" if its miles or "iln" for kilometres. Simples!

[Jakobi]

Shouldn't have to unplug anything. Its all in the setup menus (if your talking about the traltech vapour). http://gallery.trailtech.net/media/i...structions.pdf

"TO ENTER DATA SETTING
MODE, HOLD ALL THREE
BUTTONS FOR 3 SEC
Release buttons to
continue.

TO CYCLE BETWEEN M/H AND KM/H, PRESS (down arrow)
TO CONFIRM, PRESS (MODE button)
Vapor will go to the next setting."